PDA

View Full Version : HELP urgently needed...!!!!....


You See
17-10-2005, 06:12 AM
Anyone out there know/has a heavy duty clutch capable of say 300-350HP at the wheels?
I'm getting my 6 puck out that's been causing me grief (major grinding noises) and need something decent. Make/Type/Part numbers?
Also is there anything that should be done while putting in the new clutch? ....I'm sure the b@st@rds f#cked up somewhere!! /pan

Hope you guys can share some light in my direction.....pleeeeeease???
dickytim
17-10-2005, 06:23 AM
see this auction

http://www.trademe.co.nz/structure/auction_detail.asp?id=37966321

If you want it I will not bid against you. Let me know
dickytim
17-10-2005, 06:25 AM
My car started grinding at Puke, it turned out that the flywheel had come loose, when we put it back we made sure to torque them up and put thread lock on them.
You See
17-10-2005, 06:48 AM
Nah that auction's all yours mate.

"Torque them up and put thread lock on them" ...Excuse my ignorance, but huh? /pan
dickytim
17-10-2005, 07:04 AM
sorry, we made sure the flywheel bolts were tightened up to the correct torque setting and used Loctite thread lock to keep it tight.
bradc
17-10-2005, 07:17 AM
actually Richard, now that you mention it, I'm probably the only person that has heard your flywheel and Uc's car when they have been making the grinding noise, and the noise is in fact very very similar.

Uc, it is worth a shot - get them to check your flywheel
dickytim
17-10-2005, 07:19 AM
You See what are you doing this week end ?
You See
17-10-2005, 07:24 AM
Thanks....I think I'll get them to look into this when they change the clutch.
Richard...Did the noise only happen when taking off from a stand-still?
You See
17-10-2005, 07:25 AM
You See what are you doing this week end ?
Nothing this weekend...apart from the usual :chugchug:
dickytim
17-10-2005, 07:26 AM
do you want to add me to your msn ?

dickytim@hotmail.com
You See
17-10-2005, 07:30 AM
Done...Tho you don't seem to be logged in...??...
bradc
17-10-2005, 07:38 AM
looks like a mini-meet forming?

Where are we all going? If it is on a Sunday, I'd be keen to come along and help out.
dickytim
17-10-2005, 07:45 AM
no mini meet, just helping out a club member.
You See
17-10-2005, 07:52 AM
:thumbsup:
You See
17-10-2005, 11:31 AM
Has anyone got any opinions/part numbers on Exedy clutches that they're using?
You english boys seem to be packing some serious ponies, helppp??
Wouter
17-10-2005, 12:15 PM
no mini meet, just helping out a club member.

You See have you ever considered Joining the club and becoming a full member? It's well worth the $20! :thumbsup: