MIVEC Head ??

[zentac]

The 6A13TT engine is almost identical to the 6A12 Mivec engine, Ive used the 6A12 wiring loom to wire up my 6A13TT engine, I wonder if it would be possible to put a MIVEC head on the 6A13TT ? It gives an extra 20bhp on an FTO....just a thought, I may look into it further next year.

[Brind]

That'll be interesting.

[zedy1]

think it would

[Mante]

It would be very impressive, especially for those that want to reach that 400 whp. Here in the US I dont have the luxury of running across FTO's with the mivec motor, only one here that I know of that is not being used. Im most cases doing a head swap really only consists of sending the bare block from the 6a13 to a machine shop with a head gasket of the mivec 6a12. From that point everything should line up.

[EdmundVR4]

Go for it Zentac ! That should give you a good boost at high rpm's.
If you haven't already...check the power on MORITAKU's MIVEC + TURBO FTO !!!
Ed
http://www.geocities.co.jp/MotorCity-Circuit/1515/index_e.html