A quick Brembo Question

[tig202]

I have the job of fitting Brembos to my leggy soon, I have the post facelift hub carriers with ABS sensors intact (cheers Mo:afro: ) but one of the bearings seems to be shot.. The question is, are the post and pre facelift wheel bearings the same ie could i unbolt the bearing carrier and swap it over to the new hub carrier?

[pezza]

....

but one of the bearings seems to be shot.. The question is, are the post and pre facelift wheel bearings the same ie could i unbolt the bearing carrier and swap it over to the new hub carrier?


Good stuff tig, the brembo route is becoming v popular, and its def worth it (if you dont have to change the driveshafts bearings etc :D)

You should be able to swap the bearings over, most conversions that go without hiccups :thinking: will use the pre facelift bearings in the post facelift hub carriers..

Good luck!!

[tig202]

Cheers pezza:2thumbsup I have had the parts sat around in my garage for yonks, its only now I have had the time to look at changing all the bits over!