Which rims for Brembo conversion?

[Kalle]

I could not find anything posted except for that I should be looking for rims that fit the EVO 6-9

Other than standard on the EVO, please write the brand of the rims that will have Brembo clearance

[You See]

I've got Enkei RP02 18x8" with a 35 offset.
There's only a fraction of a mm clearance, and as the Brembo's expand under certain conditions I also got some 3mm spacers to accomodate this.
Good Luck!

[bernmc]

If you look at any alloy wheel site or store, and see what they offer for the evo's, you'll be fine. As long as it will fit an evo 6 on, it'll fit your VR4.

MLR is another good place to pick up 2nd hand alloys - some lovely stuff recently.

[bradc]

bern is right there, it is difficult to give an exact list, however if you see someone with an evo6-9 with a certain model of wheels on, you will know they will clear the brembo's

[Kalle]

Ok, so I'll just have too look for some used rims then..
But it would be nice to put up a list or something whenever one get across a set of rims that fit the EVO

[Nick Mann]

Or browse an Evo site and see what owners are putting on their cars? I know the choice is limited.