Found these on U.S. Ebay

[thehedgepig]

Whats the consensus of opinion, worth it or not?

If it is which one?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8069752781&sspagename=STRK%3AMEWA%3AIT

and

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8069764593&sspagename=STRK%3AMEWA%3AIT

or

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8069679067&sspagename=STRK%3AMEWA%3AIT

[Spirit]

Could also speak to Bonsai Boy (Graham), he was doing complete FMIC kits for £350 but it was a while back : http://www.clubvr4.com/forum/showthread.php?t=8797&highlight=intercooler

[Louis]

HI,
Watch out for the piping kits!!.
it,s rubber hose, not silicon, so it will expand under pressure, also when you make up the pipe work you will need to cut to size and then weld or roll a beaded edge around the hard pipes, otherwise they will blow off under pressure, (even with the tightest hose clamps, they will still blow off), the kit is for an older vr4, not v6 twin turbo, ( I know it's a bit obvious, but thought I would mention, just in case)

[richy rich]

yes the last 1 is for a 6g not 8g

[bradc]

Those tubing kits are for the oldest VR-4's, the 4 cylinder ones. You can buy the intercooler in the UK, and you're best to see JayJay about the hoses.