Are these alloys suitable for my V6 Sport ?

[MGV6]

Wheel/alloy demensions:

Metal Type: Aluminium
Stud Diameter: 114
Rim Width: 8J
Rim Diameter: 17 inches
Rim Structure: One Piece
Offset: 18
Number of Studs: 5


Thats all the info i have. Its on loot.com and I am not sure if this will fit my Mitsubishi Galant V6 Sport (2000 reg)

5 stud ok?

[Nutter_John]

Hi gtz

I think the size etc looks ok but the offset is wrong , think should be around 38-45

[MGV6]

Hi gtz

I think the size etc looks ok but the offset is wrong , think should be around 38-45

ok. so no use ?

btw: some tyre specialists like "Elite", they can change offset and that, would that do the trick or not recommended?

[Axeboy]

Non VR4's are all 4 stud are they not?

[Nutter_John]

Think they would change the offset by adding spacers which is not always good as anything over a few mm then the stubs become stresed .

I would prob say not to these as the offset is to great - but someone with more knwoledge will no doubt confirm or deny :)

[imcarm]

Non VR4's are all 4 stud are they not?

Yep, non VR4's are all 4 stud.

[Gly]

Non VR4's are all 4 stud are they not?

no, the str legnum is 5 stud, v6 n/a 4wd

[bradc]

Those mags will stick out a little too far, look for something around 35 to 43mm.

As far as the stud pattern goes, there are also some NZ new Galants that are 5x114.3 and come with the stock prefacelift vr-4 mags on them.

[ritch_w]

Wheel/alloy demensions:

Metal Type: Aluminium
Stud Diameter: 114
Rim Width: 8J
Rim Diameter: 17 inches
Rim Structure: One Piece
Offset: 18
Number of Studs: 5


Thats all the info i have. Its on loot.com and I am not sure if this will fit my Mitsubishi Galant V6 Sport (2000 reg)

5 stud ok?

no!!!! u need 4 stud and a 67.5 cetre bore too

[MGV6]

ok so just to make it clear.....what is the ideal range for offset for alloys?