PDA

View Full Version : Hand Brake Light Switch



Roberto
31-07-2006, 11:54 PM
One of the strange thing that happens.

Under decent acceleration the hand brake light on the dash comes ON./Grrr

Now I presume the switch has just come loose, BUT WHERE IS IT?

Answers in a reply Please....

Nutter_John
01-08-2006, 09:16 AM
If i'm correct the hand brake light is also the brake warning light , have you checked the fuild level in the brake cylinder . I had an issue a while ago where the light would not go off but this was down to some fuild spilling on the sensor in the cylinder .

White Lightning
01-08-2006, 09:21 AM
Agreed - it's probably more likely that the fluid level is down a little and as you are accelerating the fluid is moving in the reservoir. I would check the level.

Wodjno
01-08-2006, 09:22 AM
Is it also an indication that the Pads for the handbrake are wearing low ??

Nick Mann
07-08-2006, 02:09 PM
The light coming on under acceleration is almost certainly a low fluid level warning. The sensor is toward the front of the reservoir, so loses contact with the fluid under acceleration.

Check the pads before topping the fluid - the normale reason the fluid is low is that the pads are well worn so the pistons are sitting a long way in.

HTH! :thumbsup: