PDA

View Full Version : Four VR4's at AP at once !


Spirit
16-10-2006, 10:52 PM
Yep, there was Kev's, mine (having had the HID's fitted) and two others......:2thumbsup

The first was having some toys fitted - full Tein adjustables, with the interior control box, FMIC and new clutch:

uploaded/2/1161035345.jpg

Recognise it ?

uploaded/2/1161035440.jpg

The other one was trailered in needing a new transfer box......anyone recognise this one ?

uploaded/2/1161035528.jpg
BraindG
16-10-2006, 10:59 PM
wths going on with the bonnet of the white one? :thinking:
Spirit
16-10-2006, 11:02 PM
wths going on with the bonnet of the white one? :thinking:

I guess it was just condensation mate - flash reflecting off it ?
BraindG
16-10-2006, 11:04 PM
ah, ok.. that makes sense now.. i just looked at it and went wtf.. must be off to reds/marcus for spray job.
d i c k i e s
17-10-2006, 02:00 AM
must be cold there.
VR4 MAD
17-10-2006, 06:25 AM
Hey Spirit, did you get to see or know which type of Tein coil over they were by chance. Would be really keen to know. :inquisiti

They aren't what we know over here as the "Super Street" type because they have that third adjustment ring :speechles which I think allows height adjustment without altering the preload. :pimp2:

That level of adjustability is usually only available on the true racing type struts. For racing read 'expensive' types. /pan

Cheers.
Spirit
17-10-2006, 07:38 AM
I didn't, as the car was up on the ramps during the time I was there. Will try and find out for you.
HJM
17-10-2006, 08:14 AM
Well I reckon the silver one belongs to that bloke who has the same name as the slowest corner at the Nurburgring :scholar:

H
Spirit
17-10-2006, 12:07 PM
Well I reckon the silver one belongs to that bloke who has the same name as the slowest corner at the Nurburgring :scholar:


You would be correct sir......Mr Richie Elliott :2thumbsup
bradc
17-10-2006, 07:28 PM
If the Teins have an in cabin controller then you know they are going to be expensive!
VR4 MAD
17-10-2006, 10:40 PM
If the Teins have an in cabin controller then you know they are going to be expensive!

Not always true that. The EDFC will fit many of the Tein range of shocks.

I'm fitting the one I've bought awhile ago to the Tein HA's I've got ........... which I haven't yet got around to fitting /pan

Only a small change to the top adjusting screw and away you go.........well in theory anyway.

Time will tell if it works in practice though. I've seen and read about several HA installs that have EDFC units fitted OK so it should be all good. :2thumbsup

Hope so anyway..............otherwise there will be a cheap EDFC for sale soon after. /Grrr /pan