Locking Rings

[SHOWVR]

Chucked in the teins in the weekend thanks to "Gly". Was really pleased until we tried to adjust the height. the locking rings were brittle as!! they snapped on us! Bought them off trademe so going back to the seller to get some answers...... Gly recomended a place in Manukau, anyone here had this problem before, know a place where it doesnt cost an arm and a leg to fix? i

[stuartturbo]

Funny enough mine did the same thing the collar number is
LSS-02-953-16-2 this is the bottom one cost £7uk
Should be a 2 day thing but my supplier was rubbish only took 4weeks to get the wrong ones
for HA shocks

[mpau009]

Chucked in the teins in the weekend thanks to "Gly". Was really pleased until we tried to adjust the height. the locking rings were brittle as!! they snapped on us! Bought them off trademe so going back to the seller to get some answers...... Gly recomended a place in Manukau, anyone here had this problem before, know a place where it doesnt cost an arm and a leg to fix? i

Iv just had the same problem with some Teins i got from Osiris, i forgot to try and adjust them, and they were jammed solid, and i ended up having to cut 3 of the bigger rings (spring seat) off

SAS in Wairau got them in for me, about $50 a pop tho.. But authentic Tein.
I assume they could get the littler ring as well.

Those rings are a pain, they corrode on, and theres so much surface area they are impossible to get moving again, i actually broke our bench vise trying to turn them with a big lever, then they crack even using the proper Tein tool, i think i'll have to put some copper grease on them once iv finished.

[ShadyNZer]

ahh dunno if its the same thing but when i went to get my adjusties raised the dudes at hyper said it had seized up so they fixed it up for me and raised my front up bout 20ml....think it was $50

[mpau009]

These are the people, i got them from:

Suspension Autoparts Specialists (SAS)

Address: 11 Silverfield Takapuna Auckland
Phone number: 0-9-444 1390

[mpau009]

Oh yeah, apparently there are 56mm and 58mm ID ones, depending on the different models of Teins, so make sure they order you the right one..

[SHOWVR]

Cheers guys, mine are the height and damper ajustable. i think im gonna change all four.

[Gly]

yours are the type HA ones...

think thats what the sticker said...
you manage to find that spare bolt at Uc's?

[You See]

Yup...the bolt was fine! :D
And bugger about that locking ring dude....as i said on the day, them pies were good! :2thumbsup

[Gly]

LOL, fat ass!

[pezza]

Funny this should come up but there seems to be a fair few problems with
these locking rings and spring seat rings.

The HA wagon range seems to be referred to as Basic Wagon Type and have also seen refs to .... get this... "Low Down Spec Cool Style Master Type Wagon" :afro: What the TEIN guys were on when they launched this product.. I will never know :thinking:

Anyway, There seem to be two Product ID codes... Starting with either

DUR43 - (12531) Low Down Spec. or;

DSR42 - (U1SS2) Type Wagon

I am not sure about the differences between these units, maybe some come without spring tops, or maybe different spring rates.

I get the impression that the wagon type DSR range is a revision of ealier DUR?
but I could be wrong, maybe any TEIN spotters or distributors (Mr Voodoo perhaps) can put me straight on this...


Are the various locking / spring seat rings the same across the HA range? Anyone know? :thinking:

Also came across THIS (http://www.j-rally.net/~marjo/comfort/leg1/lib/sus/suspension.html) page (I think this may have been posted before?)

/end ramblings

Cheers

:zzz:

[pezza]

OK Just to re iterate and confirm part numbers (collected from various sources) For the HA Wagon ( Low Down Spec Cool Style Master Type Wagon) part number DUR43-12531:

Upper ring or spring seat part number: LSS-01-95315-2
Lower ring or spring seat lock part number: LSS-02-95316-2
The dust boot part number: SAP-24-G0681-2

Cheers...

[pezza]

...then there was one locking ring /help

They are brittle lil bu**gerz /Grrr

[stuartturbo]

trouble is they are cast not from solid or forged am tempted to make my own

[OSiRiS]

Iv just had the same problem with some Teins i got from Osiris, i forgot to try and adjust them, and they were jammed solid, and i ended up having to cut 3 of the bigger rings (spring seat) off

SAS in Wairau got them in for me, about $50 a pop tho.. But authentic Tein.
I assume they could get the littler ring as well.

Those rings are a pain, they corrode on, and theres so much surface area they are impossible to get moving again, i actually broke our bench vise trying to turn them with a big lever, then they crack even using the proper Tein tool, i think i'll have to put some copper grease on them once iv finished.

**** dude please accept my apologies. I didn't see this thread until now and if I had known the rings were seized I would have told you before selling them to you. I never had the tool to adjust the rings so I never bothered!

Again my apologies, I assumed that you would have txted me or rang me if there was a problem with them.

:(

[mpau009]

**** dude please accept my apologies. I didn't see this thread until now and if I had known the rings were seized I would have told you before selling them to you. I never had the tool to adjust the rings so I never bothered!

Again my apologies, I assumed that you would have txted me or rang me if there was a problem with them.

:(

No worries, they were second hand and I'm a big enough boy to check these things for myself. It just wasn't something i thought to check, i figured some brute force would sort them out, but man were they stuck...(read bench vise exploded when i levered on them:afro: )

The whole lots looking pretty good now, i sanded them back and painted them gold. I'm just waiting on one more of those locking rings to arrive and then i'll be able to put them in:happy:

[mpau009]

Damn double posted. Does the site keep timing out for anyone else...