PDA

View Full Version : camshaft sensor


Paul C
30-10-2006, 07:37 AM
Any ideas how much one cost and how hard they are to fit. i have a list of faults so i thought i would tackle this one first.

Thanks paulc
bradc
30-10-2006, 08:09 AM
mine was about NZ$60, so I would imagine you would be looking at 20-40 pounds.
Paul C
30-10-2006, 01:18 PM
just ordered sensor £82.50 picking it up in the morning.Has anyone fitted one of these before. Just after as much help as possible as dont know where its located.
Paul C
31-10-2006, 10:47 AM
Just picked sensor up, doesnt look to much of a challenge.is there any gaskets or seals that need replacing when taking cam belt cover off.Does anyone have any tips before i mess up changing it.
14064
Paul C
31-10-2006, 12:39 PM
just started changing the cam sensor and its raining,great. but other than that it is quite easy to do. the space is limited so thats making it a bit fidderly and time consuming.once you have the nearest front cam cover off the sensor is there behind the cam pulley wheel.2x 6mm bolts hold the sensor in place and a cable clip with an 8mm bolt i think. struggling to get this on out at the moment as there isn't room for a socket and i cant get the right leaverage on a spanner. stopped raining so must carry on will post pics later.
Paul C
31-10-2006, 02:11 PM
sensor changed but still indicating a fault on the data logger.
Wodjno
31-10-2006, 02:16 PM
sensor changed but still indicating a fault on the data logger.

What actually is the problem with the car ??
Paul C
31-10-2006, 02:19 PM
doesn't seem to be running as smooth as normal, checked the fault codes and there was a few including cam sensor. I've been working my way down the list changing parts to see if i can solve the problem without going to a mits'y garage.
Wodjno
31-10-2006, 02:26 PM
doesn't seem to be running as smooth as normal, checked the fault codes and there was a few including cam sensor. I've been working my way down the list changing parts to see if i can solve the problem without going to a mits'y garage.

What did the other fault codes show to be at fault ??
Paul C
31-10-2006, 02:30 PM
O2
Air temp
Air Flow
Cam Sensor
Engine Coolant Temperature
Tps
Wodjno
31-10-2006, 02:42 PM
O2
Air temp
Air Flow
Cam Sensor
Engine Coolant Temperature
Tps

Did you do an ECU reset ??

Not smooth when.. Idling, Cruising, Full throttle, Hot, Cold ?
Paul C
31-10-2006, 02:45 PM
yes via the battery and the datalogger cel reset

I've ordered a new engine temp sender hopefully that will arrive soon. I have also removed the bmc cda air filter and returned to standard.
Paul C
31-10-2006, 03:12 PM
here is a picture of the sensor fitted hiding behind the pulley.

14067


Its not smooth when idling and when cruisin along it feels abit jumpy like it doesn't know where to keep the revs.
Paul C
02-11-2006, 05:12 PM
Just relaced Engine coolant temperature sender and still the fault exists. Is it worth getting the faults read by mitsubishi to see if they are true faults coming from the reader? or am i just fixing the wrong parts.