new year ...must get legnum done

[MR.VOODOO]

i have not touched the vr4 for 5 mths as have been to busy with wrok
anyway it,s about time i did

1st question i have a pre facelift vr4 , so i will need facelift hub carries to fit brembo brakes ?
if so where do i get such things and i take it evo 4-6 brembos is what i need
any one got any ?

as i am about to change the lifters ( thnaks nic ) where can i get some race cams from any idears

many thnaks ian

[WildCards]

Marcus (Rally205) sorted a 4 pot brake upgrade for the pre facelift. The calipers are smaller and lighter than the Brembo's and fit under standard alloys. £965 was the final price if I recall which includes calipers, mounting brackets, discs and pads, a better bet than sourcing and funding rare as rocking horse droppings used parts from other cars I'd have said.

[Nutter_John]

Hi Voodoo

I don't think anyone has managed to get hold of different cams , but there was talk that KevinAp was trying to source som but don't know if he managed it , maybe worth a pm or Call to him .

Sorry I can't be more helpful it's just I'm useless :D

[Wodjno]

Hi Voodoo

I don't think anyone has managed to get hold of different cams , but there was talk that KevinAp was trying to source som but don't know if he managed it , maybe worth a pm or Call to him .

Sorry I can't be more helpful it's just I'm useless :D

I think Graham (BonsaiBoy) Had his re profiled.. :thinking:

Not sure where, for what or for how much though /help

[Axeboy]

Evo 4 to 9 calipers fit if i remember correctly..

And yep, facelift hubs needed (maybe ABS sensors as well)..

Although you may want to try and mod the pre-facelift hubs to fit.

[Gly]

evo 5+

e4 still has normasl breaks on it, not brembos!!

[Nick Mann]

The bolt hole spacing on the hub-carrier changed, as did the length of the abs sensor and it's mounting. The facelift has the same spaced holes as the evos, so as mentioned above the evo brembos will then bolt on. Make sure your wheels will clear the brembos - they are very wide and so many wheels will foul them with the spokes. Try the MLR and place a wanted advert for brakes/wheels as required.

(Still love my lifters!!)

[MR.VOODOO]

got to fit the lifters yet .............

[Kieran]

So, what else have you got planned for it, Ian?

[MR.VOODOO]

well the outside is apart form some more sign writing ...
i have a wet nos kit here ready to go

the stereo is another thing i have a screen where the drivers air bag was i have built new door pannels for the front with 3x17cm mid and twt each side
i am going to do a complete rebuild on the centre consul , i have no back seats at the moment ....... cant make my mid up about that one lots of subs or seats back in ..............

[Axeboy]

RPW sell cams for the 8g Vr4, as well as camshaft gears

[MR.VOODOO]

have you got a web address for them ?

[stuartturbo]

http://www.rpw.com.au/
assumption

[Axeboy]

Thats it, quite a bit to look at.. :)

[MR.VOODOO]

this is it so far

[stuartturbo]

Wings and bonnet what make are they and can you get them price look like the ones i want

[MR.VOODOO]

euribuni i got them from the usa direct ,

http://www.erebunicorp.com/accesscustom/mitsugalant99.htm

[d i c k i e s]

looks mean

[Wodjno]

Looks Kin Awesome /toycar

[stuartturbo]

euribuni i got them from the usa direct ,

http://www.erebunicorp.com/accesscustom/mitsugalant99.htm


that the bonnet i have been looking at and the wings i wanted are not listed anymore DOH
whats the fit like and do you have to use additional pins

[BraindG]

Oh its looking fantastic! what a difference.. adding the blue spokes to the wheels has make such a difference!
GJ:2thumbsup

[MR.VOODOO]

the bonnet wings and body kit where are good fit , infact very good

[White Lightning]

Look very smart. Good job :thumbsup: