PDA

View Full Version : Flywheel Options?


Axeboy
08-02-2007, 09:54 PM
Gents

Can anyone confirm which flywheels fit the vr4?

Im after a lighter one and im sure the evo 7 one fits, but can anyone confirm?
BraindG
08-02-2007, 09:59 PM
ive got an evo 8 one on mine, but it required a modification, the 7's go on no bother as far as i recall.
Axeboy
08-02-2007, 10:08 PM
See, thats what I thought, but when i search for an Evo 7 Flywheel it states its for both the 7 & 8....
Nick Mann
08-02-2007, 10:12 PM
I think the 7 & 8 flywheels / clutches are a slightly lager diameter? 4 & 5 clutches are the right size for the VR4. Although, I am lead to believe any size will fit as long as the clutch and the flywheel are matched.

Did you get that clutch of the MLR?
Axeboy
08-02-2007, 10:14 PM
Naaa... i was interested to try it at that price... but never got it in the end.


Im going to bag clutch parts from RHD, so ill see what more I can find.

Lida sell a flywheel, although im unsure as to its advantages, if any.
Axeboy
08-02-2007, 10:18 PM
Also... to confirm.

The Vr4 is a 240mm clutch, as is the Evo 7 & 8

The Evo 4,5,6 are 230mm
Nick Mann
08-02-2007, 10:47 PM
Now that is interesting. I thought the VR4 was the smaller size.
Axeboy
08-02-2007, 10:52 PM
Well..

This is interesting.

When I spoke with Mike at Camskill, he reckoned that 2 different clutches exist for the vr4. 240mm & 225mm as per the camskill site.

However, I reckon he has based that on chassis number EC5W which doesnt just mean the vr4, but also the STR if I remember correctly.

So, the 225mm would be for the v6 engined cars, and 240mm for the vr4's



I think :)
Nick Mann
08-02-2007, 10:54 PM
I have a well used one in the garage. I'll measure it tomorrow evening, and we'll see for sure!
Axeboy
08-02-2007, 10:54 PM
Good man...

FACTS!
mpau009
08-02-2007, 10:58 PM
Well..
chassis number EC5W which doesnt just mean the vr4, but also the STR if I remember correctly.
I think :)

not sure about the clutch sizes, but EC5W definately is used as the STR (Legnum) chassis number if that helps
Axeboy
08-02-2007, 10:59 PM
not sure about the clutch sizes, but EC5W definately is used as the STR (Legnum) chassis number if that helps

Good man

:)
Nick Mann
10-02-2007, 12:09 PM
Also confirmed in your latest thread. VR4 clutch diameter is definitely 240mm.

:thumbsup:
Axeboy
10-02-2007, 12:48 PM
Nice one!