PDA

View Full Version : belt problem 2



ANTHONY
11-02-2007, 07:10 PM
right . i'v now got the same problem. i had the car serviced with new cam belt then the sqeal started. so the garage replaced the AUXILLARY belts ok for a week then the sqeal came back when cold. took the car back they said all was ajusted correctly. i'v tryed turning the steering and puting on all electics still noisy but only for about 20 secs. the garage said that its proberly the pully thats worn. which pully are they talking about?. if it is the pully then i can get this done under my warrany but not new belts. i was thinking of taking it to mitsubushi but if its only the belts how much would they charge. if its a pump then i'm covered as warrany direct will now pay unlimited labour charges. any ideas?

White Lightning
12-02-2007, 12:46 PM
They will be referring to the power steering tensioner pulley. I replaced mine when we did the engine swap. You can get them from Camskill for £58 >>>

http://www.camskill.co.uk/products.php?plid=m22b0s1402p6028