which bov?

[dutch driver]

guy's

which bov do you all have??
why do you have him?
which sound has the bov.
which brand?
and wich type (of the evo 4,5,6,7)

[BraindG]

i have a hks super sqv, its loud and scares children I love it! Wouter recently bought the same one, but... its not the same it doesnt have the pressure screw on the end to change when it releases.. also its seems much quieter than mine... not sure why its different though.

[stuartturbo]

i have a hks super sqv I think
But it's not quite the same on an auto

[Nutter_John]

I have a HKS , sounds great and has the adjuster screw . Only issue I have found is that the thing now over fuels so much when i back off I can smeel the unburnt petrol . But that will be mapped out when I get a MAP ECU2 fitted

[dutch driver]

and do you all have the bov of a evo 5??
standard for the VR-4 there is nothing(bov than).

[Axeboy]

Evo fitments will fit the vr4, so anything from 4 - 9 should fit, and you wont need a fitting kit, just the bare BOV.

Ive had many, including a HKS SSQV, but found it too sharp a noise, too high pitched.


the best VTA BOV by far is the Sard R2D2 in my opinion, very deep and aggresive noise, plus its about a 1/3 of the price of a HKS SSQV.

Conaboy also prefers the R2D2...

Top choice for me.

[dutch driver]

aaaaaaaa
thanks mate

i'm going to look for the r2d2.
what is the price in scotland for the r2d2.

and do you have a sound or a movie of the r2d2.
i'm very intrested.

thanks already

[dutch driver]

is this the sound of the r2d2.
it's not the same car but we getting a idea
http://www.youtube.com/watch?v=wxMr14M8uEU

[Axeboy]

I think it cost me £70 from a guy on ebay, he sells loads of stuff.

It was very well made too.


Found some clips on youtube:

http://www.youtube.com/watch?v=KWebbGhNbRk

[Axeboy]

Yep, sounds similar...

[dutch driver]

really
70 £
thats € 101
and then transport
ppffff

here in holland its € 250 thats £168
i'm going to look on e-bay

thanks

[Axeboy]

http://cgi.ebay.com/ebaymotors/SARD-R2D2-BLOW-OFF-VALVE-DUMP-BOV-hks-blitz-sqv-ssqv_W0QQcmdZViewItemQQcategoryZ33742QQihZ010QQite mZ200078703272QQrdZ1QQsspagenameZWDVW


This is the guy i used, very good service.

Should be about 100 euros delivered.

[Si.]

HKS jobby, but a newer one without the adjustable screw. Seems to have a much higher pitched sound, but still capable of scaring the small and the elderly, so it'll do.

[dutch driver]

thanks again mate

[Eagleton]

Hi guy´s!

I know I´m a noob on the VR4´s, but wont the engine run to fat on gas when the bov releases the messured air after the air mass meter? Am I wrong?

If not, I would love to have the "psssscchh" sound that it makes. (and the whole spool-up effect to that it´s suppsosed to help with, right?)

[rayray24]

I just scored a greddy (type s) one so i know what i'm doing this weekend! I do get a little bit of sound for my standard one thou, But i want to scare little kids too!

[mpau009]

Hi guy´s!

I know I´m a noob on the VR4´s, but wont the engine run to fat on gas when the bov releases the messured air after the air mass meter? Am I wrong?

You are right, its adding to my woes at the moment, and the push type VTA Bov's cause idle issues coming off boost unless the spring tension is just so for the same reason, given the choice again, id go for an uprated recirculating model, or one of the genuine SSQV ones which seem to work well on others cars

[Eagleton]

allright, does anyone have some pics of an installed HKS SSQV on a their VR4? And perhaps a list of mods done to make the BOV work on our engines?

[Si.]

Pics located near the bottom. (http://www.clubvr4.com/forum/showthread.php?t=20420&highlight=oil+bov)

No mods, just installed with the kit.

[Dan_G]

Dunno if this post is valid anymore but I have a GFB stealth FX. bit pricey but a very well engineered piece of kit. the big plus is that you can choose if you vent to atmoshphere or recirculate... or anywhere in between.

Dan

[ralliart-type-s]

My bov is just a twin piston forge atmos one. got it 4 nowt off a mate with a saph cossie. Took it apart cleaned/greased it and stretched the spring a bit to give it a bit more tension, et voila my pssshht is complete. tried a hks one off another mates s14a drift car but only single piston so car overfuelled like mad, loadsa black smoke.