Grounding kits? Any Good?

[jayjay99]

Are they any good? Is there any point? Is it an improvement worth the money? Just looking through ebay, saw this (http://cgi.ebay.co.uk/Mitsi-Legnum-Galant-2-5TT-specific-grounding-earth-kit_W0QQitemZ120092180563QQihZ002QQcategoryZ43120Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem) and was wonder what you thought of them?

[peter thomson]

Is that not the same kit that bernmc had fitted. He opened a post about the fitting here http://www.clubvr4.com/forum/showthread.php?t=21462&highlight=grounding

[Axeboy]

Yeah, i have one too.

I think they are ok.. cheap, and im convinced the car runs smoother.

Might be mind tricks tho'

[jayjay99]

Ah yeah, I see, same people, well reading what bernmc says I'm convinced, for a little over £40 it's not bad. Axeboy, it said on ebay they supply all fitting instructions specific for the VR-4, were they quite clear and easy to locate?

[Axeboy]

I fitted mine before they made the vr4 kit... i used a generic kit without instructions.

But its all easy stuff m8

[bernmc]

Is that not the same kit that bernmc had fitted. He opened a post about the fitting here http://www.clubvr4.com/forum/showthread.php?t=21462&highlight=grounding

... and that would be a pic from my car in the ad!

[jayjay99]

... and that would be a pic from my car in the ad!

Where's your engine cover? Think I'll have to get one, think I'll go with red.

[VR4 MAD]

Think I'll have to get one.

Well if you do get the kit, it could be helpful to scan the instructions and put them up in them members area so others can see the earthing points and do their own should they feel like doing so......just a thought.

Good luck with the getting kit.

/toycar

[Roadrunner]

Well if you do get the kit, it could be helpful to scan the instructions and put them up in them members area so others can see the earthing points and do their own should they feel like doing so......just a thought.
Wot? Like here (http://www.clubvr4.com/forum/showthread.php?t=125)?

[jayjay99]

Well if you do get the kit, it could be helpful to scan the instructions and put them up in them members area so others can see the earthing points and do their own should they feel like doing so......just a thought.

Good luck with the getting kit.

/toycar

I've just ordered it, to avoid copyright etc, I'll read the instructions, and then post a 'similar' thread in the library section with text and pics from when I do it. :2thumbsup

[jayjay99]

Wot? Like here (http://www.clubvr4.com/forum/showthread.php?t=125)?

Well yeah, should compile something from that and I can scribble up something so we have it in the library, be good to have all those bits together there.

[VR4 MAD]

Wot? Like here (http://www.clubvr4.com/forum/showthread.php?t=125)?

Errr........yea, except my japanese isn't that good. What do cables 1 and 4 connect to? /pan

2 goes to the firewall/baulkhead I presume and 3 likewise to the inner guard/chassis?

Correct?

See now why an english set of instructions could help, well me anyway, if not others. :thinking:

/toycar

[jayjay99]

I'll post a link here to the page when I have it written up.

[bernmc]

Where's your engine cover?

Took it off for the fitting. It was the trial car, so they needed to be able to see as much as possible to decide on attachment points.