GTO bits again???

[ralliart-type-s]

:inquisiti hiya peeps and bods. gotta nother dilemma!! Been offered a pair of goodridge hoses off a GTO n/a. If they are the banjo fitting will it be the same size as the pre face lift leggie calipers?? Want to fit these and a set of ferodo ds2500's to improve pedal feel. Also need to get 2 bottom bolts out, is there an easy way w/out melting seals etc and are the slider bolts freely available. also.........how do i become cvr4 member w/out credit/debit card???:inquisiti

[peter thomson]

:inquisiti . Also need to get 2 bottom bolts out, is there an easy way w/out melting seals etc and are the slider bolts freely available. alsoSIZE="2"]:inquisiti [/SIZE]

Hi camskill have the slider bolts and replacement seal kits. I just replaced the seals in mine due to sticking pistons and they have made a vast improvement in the brakes. The slider bolts in mine were not too difficult to loosen off. A good spray with WD40 or similar should help. I used amsoil synthetic grease on the pins which is working fine so far.

[ralliart-type-s]

thanks for that about the bolts/ seals, wiil call them 2moro.:thumbsup: