parts import possibility

[KHK]

breaking up a facelift version legnum
in case you have interest, i need to send it from far away to you

[KHK]

Breaking up a facelift version Legnum VR4,
originally planned to import to NZ,
got stuck somewhere

anyone interested in the parts, please name it
price : please propose a reasonable offer

[ANTHONY]

i'm after a pair of face lift VR-4 front fog lamps

[KHK]

could you please make an offer ?

i may either send by air to you or wait till May I arrive in Heathrow airport you pick it up then

[ANTHONY]

could you please make an offer ? £50.00 + postage to the uk

[KHK]

please allow me to gather all possible offers on different parts to see the total

but £50.00 is a bit disappointing

[ANTHONY]

please allow me to gather all possible offers on different parts to see the totalok ..its the twin fog lamps i require

[g6acb]

ok ..its the twin fog lamps i require

/Wyhy me too if you can source any more.....

[ANTHONY]

/Wyhy me too if you can source any more.....i knew you'd be there mate

[g6acb]

what colour is the car?, may be interested in the wheel arch extensions too

[KHK]

purple,
5 pieces only, 1 bumper piece lost

[ralliart-type-s]

flares, all 5 bits, £100 inc postage??

[bradc]

is it a manual, does it have a high vis dash, and how many km's has it done?

[stuey]

hub carriers/abs sensors for me please. !!!!:iloveyou:

[KHK]

flares, all 5 bits, £100 inc postage??

let me take a picture for u first

[KHK]

is it a manual, does it have a high vis dash, and how many km's has it done?


it is AT, facelifted version with moonroof and , wheel arc flares
don't know whether it is high vis dash or not, i think it is

[Gly]

any go fast after-markit bits on it?

[KHK]

some parts' photo can be found at

http://www.geocities.com/khk_vr4/WreckingVR4-page1.html

[KHK]

any go fast after-markit bits on it?


consider the under bar

[Gly]

no good on my lowered car,
if theres any custom piping? headers? down pipes? i could be keen

[KHK]

no unfortunately,
all are original from Mitsubishi even the alloy wheel

[bradc]

I just saw the 'underbar', it would normally be called a lower front strut brace. That is mine! Not sure how much it is worth though, maybe $150?

[ANTHONY]

please allow me to gather all possible offers on different parts to see the total

but £50.00 is a bit disappointingwhat kinda price you looking at for the fogs?

[Gly]

you can sell the twin fogs on US ebay, or TGC for over 350$ US
last set i saw on ebay went for $475 US!

personally i dont think a vr4 is worth importing to wreak unless it had ALOT of hot bits....

parts can be had very easy here in nz, for what is mostly a bargin,

motor $500 sometimes less on tm
panals sub $100 each,
i got flare for $150,
glass ~ $20 - 50,

etc...

just not worth the hassle

[Gly]

I just saw the 'underbar', it would normally be called a lower front strut brace. That is mine! Not sure how much it is worth though, maybe $150?


you'll rip it off on NZ roads,

they hang far to low even on a stock height car.

[bradc]

Can't be any lower than a body kit, or my exhaust, surely?

[KHK]

Gly
i love the moon roof of legnum, so is the reason for importing but unforseen trouble happens
of course not importing to wreck, definitely would lose money this way

some parts are confirmed with buyers

so please name your parts that you are interested and make a reasonable offer

[KHK]

I just saw the 'underbar', it would normally be called a lower front strut brace. That is mine! Not sure how much it is worth though, maybe $150?

u serious?

[bradc]

yep :)

[defm0de]

How much is the ECU worth? im keen on that.

[KHK]

factory original ECU....it is AT Legum VR4, make sure it is what you are looking for

i don't know the price really or i need to ask around
please make an offer

[Gly]

Can't be any lower than a body kit, or my exhaust, surely?

yeh it is...
i was gonna buy a ralli art one,

but after seeing how low it sat, i left it...

sure would be fine if NZ had nice flat roads without bumps, pot holes, speed bumps, but its not the case,

you will end up ripping it off, and possibly doing some serious damage to the underside of your car.

[bradc]

def, I reckon $200 is fair for the facelift ecu ;)

I reckon the lower strut thing will be fine, I'm brave enough to try it :D

[KHK]

as long as you know where and when to steer, to slow down to avoid those bumps and holes, the lower strut should be fine

there is no 100% flat nice road in any country

[KHK]

super vr4 side skirt
anyone have interest?

[stuey]

Still interested in front hub carriers and abs sensors if you got em... no idea what they're worth or would cost to ship to uk..

[KHK]

a whole set of facelift hub carrier and abs still with the facelift legnum, not yet detached
it is also useful to me for my pre facelift version for brake modification
this parts really need some good offer before i let go, please understand

[KHK]

Super VR4 parts for those who may consider

1) red black MOMO steering
2) red black handbrake
3) side skirt
4) rear bumper lip

[FNFAST VR4]

What do super vr4 side skirts look like? Anyone got any pics of them?

[KHK]

photo of the side skirt
its main attractiveness is to make you legnum looks really low

[AncientOfMu]

Perhaps I should post in here to save any confusion.

I have registered interest in the facelift rear spoiler, Super Vr4 side skirts and possible the rear lip. All dependent on shipping cost to the UK.


Project SVR4 Body clone is nearly there /rally

[KHK]

lol


facelift rear spoiler is different from Super VR4 spoiler
i would post a photo later to show
the left one is facelift rear spoiler
the right one is super vr4 rear spoiler (not for sale)

only problem is the length of parts that makes shipping difficult
the side skirt almost 2m long!!!

i'll check the delivery fee when the Fedex dealer opens

Don't be scared by Fedex charges, may have suprise. See what they quote me.

[KHK]

anyone very familiar with electronic??

there is a set of car DVD and touch screen capable LCD from Japan
but the DVD player needs repair
Touch screen LCD works fine with antenna watching TV (NTSC system)
not suitable for UK or NZ unless you know how to modify
Price : Postage ONLY

[AncientOfMu]

lol


facelift rear spoiler is different from Super VR4 spoiler
i would post a photo later to show
the left one is facelift rear spoiler
the right one is super vr4 rear spoiler (not for sale)

only problem is the length of parts that makes shipping difficult
the side skirt almost 2m long!!!

i'll check the delivery fee when the Fedex dealer opens

Don't be scared by Fedex charges, may have suprise. See what they quote me.

I know the facelift rear spoiler and the SVR4 spoiler are different :P.

i want the facelift rear spoiler for the wifes V6-24 (same as ST-R ish) :D

Cheers

[KHK]

that is good
could u pm me your offer for spoiler, side skirt?
The earliest time to know the delivery fee is Tuesday 10th Apr, the day i start to send out some parts

[Kenneth]

anyone very familiar with electronic??

there is a set of car DVD and touch screen capable LCD from Japan
but the DVD player needs repair
Touch screen LCD works fine with antenna watching TV (NTSC system)
not suitable for UK or NZ unless you know how to modify
Price : Postage ONLY



I'm interested :) whats the shipping?

[KHK]

the delivery should be roughly around 85 NZD as these stuff are not in NZ this moment, but you could pay less if my friend is willing to take them to you in Auckland. It is quite heavy! There are altogether 3 pieces with a lot of wires: touch screen capable LCD monitor (open and close need follow up), CD radio unit (radio works, CD works but the CD eject mechanism needs follow up), DVD unit (need repair, problem unidentified, not bother to test as i am not good in electronics)

to make CD eject from the CD player, I use another CD, insert half, press the eject button then the CD inside would be ejected after several trials
when the CD player plays a CD, music/song has NO problem

the touch screen function responds OK, i disconnect the whole set and forgot to test it beforehand

the DVD units seems to be able to read (can hear some noise of trying to read), when i insert a video disc, no sound or video appear in the hifi system.

as long as the delivery fee is low and you are electronic oriented, good to try!

[Subaru ETA]

id be interested in the momo wheel... are the seats for sale aswell?

[KHK]

id be interested in the momo wheel... are the seats for sale aswell?

seats of course NOT for sale :evilgrin:

pls PM an offer for me for the MOMO

[KHK]

if i detach the taillight , rear bumper, and tail gate of the facelift legnum
put them onto a pre facelift legnum's tail
can anyone offer me advice whether it can fit or not?
Thanks

[KHK]

on the other if i cut the whole top with skyroof of the facelift legnum
and weld it onto the prefacelift legnum
can it work?

[AncientOfMu]

if i detach the taillight , rear bumper, and tail gate of the facelift legnum
put them onto a pre facelift legnum's tail
can anyone offer me advice whether it can fit or not?
Thanks

I have often wondered if the whole rear end from a facelift will fit a pre facelift.

Were the shells different? I have no idea but it would be nice to know.

And don't forget I want the facelift rear spoiler :P.

[bradc]

The bumpers are different on facelift cars, and the boot opening space is different as well. It might be able to fit, but you would need the bumper as well.

[Gly]

if i detach the taillight , rear bumper, and tail gate of the facelift legnum
put them onto a pre facelift legnum's tail
can anyone offer me advice whether it can fit or not?
Thanks


i would be cheaper and easier to just buy a faelift with a moon roof,

its been done befor... so it is possible...
i think they used a tail/rear end cut. and cut the pre facelift on and welded the facelift on on?

[Kenneth]

the delivery should be roughly around 85 NZD as these stuff are not in NZ this moment, but you could pay less if my friend is willing to take them to you in Auckland. It is quite heavy! There are altogether 3 pieces with a lot of wires: touch screen capable LCD monitor (open and close need follow up), CD radio unit (radio works, CD works but the CD eject mechanism needs follow up), DVD unit (need repair, problem unidentified, not bother to test as i am not good in electronics)

to make CD eject from the CD player, I use another CD, insert half, press the eject button then the CD inside would be ejected after several trials
when the CD player plays a CD, music/song has NO problem

the touch screen function responds OK, i disconnect the whole set and forgot to test it beforehand

the DVD units seems to be able to read (can hear some noise of trying to read), when i insert a video disc, no sound or video appear in the hifi system.

as long as the delivery fee is low and you are electronic oriented, good to try!

Cheers, I am keen. Give me a shout when you know the shipping :)

[KHK]

I have often wondered if the whole rear end from a facelift will fit a pre facelift.

Were the shells different? I have no idea but it would be nice to know.

And don't forget I want the facelift rear spoiler :P.

i need the address or postcode for checking delivery fee, please PM me

[KHK]

Kenneth, same to you, please pm me address or postcode for checking delivery fee

[KHK]

Kenneth, got the PM
after work, i would detach the wires carefully
there are so many wires and i have to decide where to cut
of course you would have as long as possible all the wires

[KHK]

AncientOfMu,
how long does it take for u to go to Gatwick airport? would u drive there for pick up?

how is the SVR4 side skirt?
It is a bit difficult as it is 2m long but i guess it would easier a little bit if u can pick up at airport

[detonate]

I could be interested in the Super VR4 Side skirts if they haven't gone yet.
Would go nicely with teh superVR4 front bumper I got of Osiris :D

[KHK]

haha, Osiris still keeping his super vr4 ?? is he selling the SVR4?

that would be an excellent SVR4 clone if you have the side skirt

[AncientOfMu]

I'm the only SVR4 clone in this club thank you very much. /Grrr

:P:iloveyou:

[KHK]

but he is in NZ, at least half an earth from u.........:laugh:

[KHK]

Kenneth, let me post a photo of the av sets first

i'd feel upset if you cannot use it as u are going to need that postage

[SHOWVR]

What list of parts do you have left?

[KHK]

the remaining almost whole car (1999 facelifted model) with japan export document aiming at 1200 pounds+delivery charge (~£700)
------------
drivable (110km/hr when i drove from wharf to home)

[bradc]

one thing I forgot to ask, why isn't this car being imported now? Does it have a severe problem or something, or is it a silly legal issue?

[Kenneth]

KHK, what exactly is broken on the AV set?

The wiring is no problem, just not sure what doesn't work?

[KHK]

there are some scratches on surface
i guess should need some time to handle with the DVD play head
with luck, if you can change the head , it may work to play,
but i m not sure, as i can't DIY myself with it
dun want to pay someone else high fee to repair

the shipping needs 9 weeks, would it be OK?

[KHK]

one thing I forgot to ask, why isn't this car being imported now? Does it have a severe problem or something, or is it a silly legal issue?

it should be a silly import regulation

[KHK]

facelift original 16" alloy with 225 tires, is this what u are asking about?
and
the SVR4 front bumper add on wings (correct name?) [2006 Dec 24th successful auction result in Japan : 45500yens!]

[detonate]

GC- buy the SVR4 bumper wing things :)

[KHK]

my inbox full now
could send me message via MSN [email]khk_vr4@hotmail.com

[KHK]

Kenneth, let me take the DVD unit to have a preliminary check from a repair man to see if it can be fixed or not.
It takes 1 to 2 days, would let u know immediately when i know the result

[MunkyWrench]

how much are the hubs and abs sensors worth ? anyone? i'd really like to do the brmbo thing on my pre facelift.

[KHK]

low price shipping to UK has just been found
but
you or someone authorized by you need to collect from Southampton
port fee may involve and to be paid by collector

for small items, i'd send by air
for bulky items, i would send in the form of pallet via ship to Southampton

that means shipping of alloy, leather seats, side skirts, bumper etc OK to be sent by ship with reasonable shipping fee

alloys £120 + postage (roughly 1 cbm)
whole set of tan leather seats with door cards £120+postage (roughly 2cbm)

[AncientOfMu]

Ill get on MSN when I get back to work and we will discuss it some more :).

Cheers

Don

[vr4moose]

breaking up a facelift version legnum
in case you have interest, i need to send it from far away to youis yours a auto ... and how much for box..

[KHK]

auto,

pm me an offer if u are keen,
need to pickup from Southampton port

[AncientOfMu]

If anyone in the UK is considering getting large stuff shipped to the UK, perhaps we could share shipping and pickup costs as I'm seriously considering getting a pallet sent to the UK.

Sharing the shipping hassle would help me, you and KHK cause it might mean he sells more bits :P.

Cheers

[KHK]

.....................y not go home?/pan

[KHK]

ROUGHLY 55 pounds per cbm + your local collection expenses such as petrol