Broken ass car bits for sale so far.

[djb160]

Sorry if you've already asked me about something and I've forgotten just give me a PM or post here.
I don't have much time to disasemble my car so this will be a long process. Heres what I've taken off so far.

1 - $500 - 4 Star Mongoose alarm, one that allows aturbo timer to run whilst activated.
2 - $650 - GReddy profec B plus 2. Still in box.
3 - $150 - Complete drivers door. (has a crack in plastic panel.)
4 - $150 - GReddy auto timer.
5 - $170/$240 BMC panel filter & BMC Pod filter with adapter respectively.
6 - $100 - Boot cover.

Anyone want something specific and easyish to get off give me a yell.

[sky-hi]

I know it's a long shot but........ Towbar?

[djb160]

Nah, I wish?

[SirVr4]

hi wat colour's you A-piler Mouldings? and stereo surounds

[VR4 MAD]

- $ BMC panel filter & BMC Pod filter with adapter (I have to find my receipts for these as I seem to recall they cost me an arm and a leg brand new.

Hi. You got any pics ?..........or a link to the makers site with the specs of the bits.

Cheers.

/toycar

[djb160]

I cant find any usefull info about them anywhere, I'll have to see if the shop I got them from has anything usefull. They're "supposed" to be better than the HKS level ones but not as good as the rally/race ones.

SiRVR4 - That ****ty greyish colour and the surround is the horrible fake wood type stuff :(

[SirVr4]

SiRVR4 - That ****ty greyish colour and the surround is the horrible fake wood type stuff :(

sweet how much for the a-piller moldings?

[Gly]

ok what do you want for these parts...

TPS from the front side of the throtal body.
the drivers side front monsoon/rain guard.
the passenger side spot light? if its still intact?

Price please, im to lazy to make offers.

[djb160]

Gly - Damn you beat me to the put the other guy on the spot. Engine and engine parts have been sold. For both $50 + you can tell me how you'd want it packaged and posted.

[Gly]

ok cool,
you able to remove the monsoon without breaking it?

you need to wind down the glass,

you will need to remove 3 black clips first,

leaver them down with a small flat screw driver (the rubber seal of the windown will just come down with it....

(save the clips ill need them)

then from the top get a craft knife and run the blade between the monsoon and door to cut the tape,

can you get it off first :P

[djb160]

I'll have a crack(bad joke) at it this weekend.

[Yasthil]

Still got the GReddy profec B plus 2? How difficult is the installation? Are you in Auckland?

[djb160]

Im in chch an yep the boosta is still here. DUnno about the install I was gonna get the guys at the local dyno to do it so they could ajust my boost at the same time. If you want to ask in the techy forum Im sure there'll be someone that would be willing to help ypu for a few beers.

[Gly]

any luck with the monsoon?

[djb160]

Nah I've been too flat out at uni to get anywhere on the car.

[Gly]

sorry dont need the parts anymore.

got some from a local wreak.

[djb160]

Sweet as

[chch thomo]

please let me know if boot cover is still available

[Goku]

If you're talking about the rear blind for the boot, Sorry I bought that.

[chch thomo]

Hi this is a long shot, do you have a set of front guard arch covers the plastic thingys

[djb160]

Hi this is a long shot, do you have a set of front guard arch covers the plastic thingys

Do you mean the pieces of plastic that go between the tyres and the guards, or the flares on the outsides of the fenders?

[chch thomo]

Hi the plastic between the tyres and guards mine are really munted flapping around at the bottoms.

[djb160]

I think i've got one you can have. I'll have a look tonight.

[chch thomo]

hope your search is succesful , thanks for trouble you are going too

[djb160]

thomo, you've got PM

[Rosco_NZ]

Hey djb160 (or anyone else!),
i know its a long shot but i was wondering if you happen to have these random pipes.. think they go to the transmission but not positive. mine are crushed and i have not been able to find a replacement.


p.s. those plugged up hoses are the Dump-valve pipes if ya can't figure out the location based on the 2 pics, dont worry i have a BOV these are old pics from when i brought the car.

[d i c k i e s]

hey rosco, long time no see!
What did you use to block those pipes for the BOV?

[djb160]

Rosco, I'll have a look this weekend.

[Rosco_NZ]

Rosco, I'll have a look this weekend.
Thanks man that would be great.


hey rosco, long time no see!
What did you use to block those pipes for the BOV?.


A BOV... hahaha
no seriously. when i brought the leggie it didn't HAVE a BOV it was like it is in the photos. they are just metel stopper things with typical worm drive clamp things.

interestingly i took these photos because of the missing BOV issue.
then i stumpled across this thread and though what random broken ass car bits do i need? well i need those 2 little pipes... i was too lazy to go take more photos of the pipes i required so had a look at existing photos had had and dug these ones up... which brings me to the interesting realisation, that the pipes, if you look closely can be seen to be crushed in these pics also so it appears that i didn't do it (yay!?) but it was like that when i brought it.

[Venatus]

im looking for the stock rear speaker covers for a 96 galant if anyone has them, i dont know if the legnums would have them? mine didnt come with them, or rear speakers at all :(

[Goku]

They look like power steering pipes.... I think they are ment to be like that.

djb160: Don't sell too many parts off the engine :D

[Rosco_NZ]

Rosco, I'll have a look this weekend.
Any luck?


They look like power steering pipes.... I think they are ment to be like that.
It's not obvious from the fotos because they aren't damaged in the photo... (though it does prove that it was me that damaged them and they were not always like that... :thinking: ) but yeah photo was from when i first got the car, and those pipes are not crushed like someone squeezed them with some pliers.
if they are indeed powersteering then it doesn't worry me as much... though it could explain why the steering feels stiffer perhaps.

[djb160]

Haven't been able to look as it's being hacked to peices by goku, he might be able to tell you. I suspect it's part of what he wants though. Give him a PM.

[Goku]

I'm not too sure if I need them, but I'll make sure before the weekend and let you know :)

[djb160]

Cool, still need to have your friend get them off I guess.

[Goku]

The car's still in the workshop....

[Fully]

im looking for the stock rear speaker covers for a 96 galant if anyone has them, i dont know if the legnums would have them? mine didnt come with them, or rear speakers at all :(

I have a set from a 99 Galant I'm sure they are the same?
I have the factory speakers as well how much you willing to pay for them?

Do you still have your alarm for sale?

[CANDEE]

Have you still got the green stuffs?

[djb160]

Yep. not even worn in yet sadly.

[CANDEE]

Send me a PM with a price and ill let you know :)

[Goku]

Right, thoes pipes are power steering pipes, I'm not too sure which bits you'll need, but if it's the bit I'm thinking of, you'll have to wait till we drop the engine to get to it.... it splits off and winds out over the gearbox.

[Rosco_NZ]

sweet as, no rush mate, they been like that for a while now and i haven't noticed anything detrimental.

though it sounds like it would be a mission to fit if you have to drop the engine out to take it off, then probably similar to put them on?

[Goku]

I would assume so, from the pic you posted up, they seem to be just after a rubber join in the line.

[Rosco_NZ]

that though had already crossed my mind when i thought it was transmission related piping.. but didn't really want to hack it off incase the tiny shavings got into the gearbox... but if its power steering related then what is it? hydrolic fluid or something? always better to get an original part than patch it up...

so back to the rubber pipe section, would a short section of vaccuum hose with a couple of worm drive clips do the trick?
or do you think the fluid would get to pressurised and bulge the piping? crushed section is about 3inch long but you could pull them almost together i imagine.

[Goku]

If you look up further towards the engine side of the pipe, you'll see that it is joined by a section of rubber hose, so you can remove it from the cooler section in front of the intercooler.

I would say that it's fine the way it is now, but if it's bothering you that much, grab some Samco fuel and oil proof lines and cut the section you don't want out, then join it together.

Drain your power steer fluid first, then you'll have to fill it up again and make sure to get any air out of the lines.

[ThEbIrDmAn13]

Anyone want something specific and easyish to get off give me a yell.

what condition are the headlights, front bumper and foglights in?? and do u ship to the US... i sent a PM a while ago

[djb160]

Sorry I didn't get the PM, don't know why. Only one foglight survived. The rest of the front was mashed rather well.

[Goku]

Yea.... the one headlight that was still on the car was f***ed :(

[djb160]

Just goes to show that if you want intact headlights DON'T crash the front of your car.:scholar:

[Goku]

All going well, the car will be shifted on saturday :)

[djb160]

Cool. If you get a chance can you yank out the t-piece from the boost gauge, as Ive put it on trademe and forgot about it still being in the car.

[Goku]

yea, I'll see if I can grab it tomorrow sometime

[djb160]

Thanks a million

[Goku]

How much for the headunit ?

[djb160]

No money on my phone. Have you checked that it still works? I dont think it's been tried since the crash.

[Goku]

He fixed it, so it works now :D

[djb160]

He ?

[Goku]

The dude who's takin the car apart

[djb160]

Dunno, not much then. It can't be worth much. What's whoever wants it willing to pay realistically?

[Goku]

bout $30

[djb160]

Sounds good to me.

[djb160]

Hey you're a member now. Congrats and 'bout time. Now for your brother.

[Goku]

Lol, I don't think my bro will be joining

[leithn]

hey is your add 4 legnum or galant am after a right rear door 4 a 96 + galant also the drivers door monsoon cover if not already gone ta

[Goku]

It's for a Legnum, the monsoon should fit though

[bradc]

drivers door monsoon will fit just fine

[d i c k i e s]

ill need to check ross. are they connected to the radiator?