StunEm
12-06-2007, 09:25 AM
This one is for all the members that have converted there auto to a manual.
The gearbox parts finally arrived for mine, everything going to plan until i tried fitting the flywheel. The original auto plate mounting onto the crank is about 44mm in diameter, my flywheel inner diameter is 40.5mm.
Is there a spacer ring fitted on there that comes off or do i have to get the flywheel inner hole machined out to fit.
The gearbox parts finally arrived for mine, everything going to plan until i tried fitting the flywheel. The original auto plate mounting onto the crank is about 44mm in diameter, my flywheel inner diameter is 40.5mm.
Is there a spacer ring fitted on there that comes off or do i have to get the flywheel inner hole machined out to fit.