View Full Version : EC3A lowering Springs
Nextleveltunerz
12-06-2007, 10:52 PM
Hi,
I'm looing for lowring springs for my 1999 Galant Viento GDI 2.4 AWD. But I cannot find any. Will the EC5A VR4 lowering springs fit my car. If not which model of Galant springs is the same as mine.
Denneth
bradc
13-06-2007, 08:46 AM
a VR-4 will be a similar weight to your car, so they are probably the best option, but a VR-4 will be slightly heavier all round, and especially so at the front, so lowering springs from a VR-4 might not lower the car as much as you actually want.
Wodjno
13-06-2007, 10:41 AM
a VR-4 will be a similar weight to your car, so they are probably the best option, but a VR-4 will be slightly heavier all round, and especially so at the front, so lowering springs from a VR-4 might not lower the car as much as you actually want.
I used lowering spring on the Missus GDi(1.8) from a 2.0.
Seem preety good..
I would say springs for a V6 would be a good choice !
Nextleveltunerz
13-06-2007, 05:19 PM
Thanks for the replies guys. I'll be placing the order for the springs today. Just ordered a set of 18's. As soon as the car is ready I'll post pics .
Thanks again.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.