PDA

View Full Version : WTB: Legnum VR4 Inlet-Exhaust Valves



cslotay
14-07-2007, 03:01 PM
Hi guys and gals, I am from Melbourne and recently had the misfortune of the cambelt breaking. I suspect that because the engine(6A13TT) is an interference type, some valves will most likely have bent. I need to source these as soon s possible so if someone has them or knows where I can get them fast, It will be great to know.

Gly
14-07-2007, 08:37 PM
www.kempys.co.nz

bradc
14-07-2007, 10:46 PM
I have a complete set of heads from my spare engine. one of the cylinders has had water in it, so those 4 valves and the the 4 in the neighbouring cylinder have some rust on the bottom of them, but they aren't corroded away or anything. If you want them, let me know.

cslotay
15-07-2007, 09:57 AM
Just confirmed it. All inlet rockers are loose, exhaust seem fine as there is no play there. so atm needing inlet valves.