Air filter box

[pungatree1]

Would a 98 Mitsubishi legnum air flow meter & bits from an 1800cc galant fit straight onto a 96 vr4 to replace the pod filter? Or is it better to fit one from a vr4? :thinking:

[Paul Beazer]

I would have though the AFM's readings wouldnt be much use, unless the meters were identical! A VR4 will flow a lot more air than an 1800GDI. Perhaps someone more in the know will be along shortly?

[bradc]

the black plastic air intake pipe is similar, but subtly different for the turbo models. You don't want to use it!

As for the MAF, I have no idea, but you don't need to use it anyway, all you're after is the cold air box and the plastic feed.

[pungatree1]

So if I remove the pod filter I should be able to connect the plastic filter box straight on? Is the plastic filter box the same size on the 1800cc as the VR4 as I want to upgrade the panel filter once I can find a cheap filter box. I already have the cold air feed part that comes from the bonnet - just need the box and the fittings to attach it where the pod filter is.

[bradc]

yeah I beleive the box is the same on all models

[wnwnwnw]

There is some differences. The bottom of the box. But i think it will fit.