View Full Version : FS : Stepper motor (idle controller)
sometimes these units fail...
and will cause problems like stalling, idle serge, un-even idle,
this one is removed from a 2.5 v6 NA,
works on both pre and post facelift vr4s (i have one on my vr4)
$70nz Delivered
jimmy
12-11-2007, 08:50 PM
Hi Gly Ive Been Told By Other Members To Clean Mine Cause Im Haveing Probs With My Idle But They Never Told Me How To Clean And If This Isnt Successful I Will Purchaase Yours I Have A 2.5 V6 Non Turbo Will This Fit And Please Advise On Cleaning. Thanks
its original from a 2.5v6 non turbo, so fintment is no issue...
some brake cleaner spray should do the job
jimmy
13-11-2007, 08:22 AM
thanks mate will give a go in the morn and let you know cheers
jimmy
13-11-2007, 08:23 AM
what about crc
jimmy
14-11-2007, 11:54 AM
hi gly ive given that stepper a clean now it seems fine i had to adjust the idle a little now when it starts cold it doesnt want to idle until i put my foot on the gas a little . do need to reset the ecu? and then adjust the idle from there? can you enlighten me on the prosedure cheers.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.