View Full Version : Part Number
orionn2o
13-11-2007, 09:40 AM
Please excuse me, I;ve had a hunt but not having much luck.
Is MR323375 the part number for the front splitter bit that always falls out??
Cheers :)
peter thomson
13-11-2007, 10:28 AM
There are different part numbers for specific colours
peter thomson
13-11-2007, 10:42 AM
Silver part number is MR325375 but with your chassiss number it would be easier to confirm it. I think you put in a 3 instead of a 5 in your thread
richy rich
13-11-2007, 11:36 AM
^^^^^is correct for Metallic silver
Metallic gray is MR325380
orionn2o
13-11-2007, 11:40 AM
Anyone got a number for black?? Cos thats what colour the lip is :)
richy rich
13-11-2007, 11:43 AM
MR325373 your wish is my command. /haz
richy rich
13-11-2007, 11:44 AM
or MR439559 not sure on the difference.
orionn2o
13-11-2007, 11:58 AM
perhaps one is matt black>?? and the other gloss??
Thanks Rich , I'll get on to the dealers this afternoon!
richy rich
13-11-2007, 12:09 PM
No prob
orionn2o
04-01-2008, 03:18 PM
Bringing this thread back alive!
Just went to play around and fit the new splitter. I went to Mitsubishi and didnt have this thread handy and they gave me a MR325375.
Anyway, is there a difference between the front splitters for facelifts and non facelifts?? Cos it doesn't seem to fit right?? Seems to not sit flush with the bumper. Any ideas?
peter thomson
04-01-2008, 03:36 PM
That one I think is prefacelift .It looks like there are others for the later model
orionn2o
04-01-2008, 03:41 PM
I've got a pre facelift! but it still looks wrong!
richy rich
04-01-2008, 03:55 PM
They don't always fit the best because of the bumper being hit a few times and also the under tray's are normally missing.
orionn2o
04-01-2008, 04:13 PM
hmm you could be right Rich, it looks ok when i bend it right back but when i let it hang on its own it's more like this:
uploaded/3336/1199459557.jpg
ianturbo
04-01-2008, 04:17 PM
MR325377 , thats a red one ! £32.56 inc vat
Nick Mann
04-01-2008, 04:37 PM
There is a difference between facelift and prefacelift, but I think it is more than the difference you have pictured above.
Mark 4
04-01-2008, 05:11 PM
I bought this part for my car a few months back and it didn't fit very well. I used a couple of bits of stainless steel strip and some clinch nuts to pull it into line.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.