tomaski
20-11-2007, 10:58 PM
Might seem like a silly question as the vast majority of parts are interchangable or identical between Galant and Legnum VR4s but is it the same in the case of the Tein s tech lowering spring kit from Camskill?
http://www.camskill.co.uk/products.php?plid=m22b0s1405p6895
I figure it almost certainly will be, but I keep coming back to the concern that the Legnum... being an estate will be designed to carry heavier loads and thus the rear suspension setup will be stiffer and thus, not compatible with my Galant.
Also, as a side note - any further information on this product / modification would be great. I'm essentially looking to drop her down a wee bit (nothing drastic) for as little money as possible. Advice on known issues, fitting cost estimates and general opinion of those who've lowered their cars would be appreciated.
Cheers in advance.
http://www.camskill.co.uk/products.php?plid=m22b0s1405p6895
I figure it almost certainly will be, but I keep coming back to the concern that the Legnum... being an estate will be designed to carry heavier loads and thus the rear suspension setup will be stiffer and thus, not compatible with my Galant.
Also, as a side note - any further information on this product / modification would be great. I'm essentially looking to drop her down a wee bit (nothing drastic) for as little money as possible. Advice on known issues, fitting cost estimates and general opinion of those who've lowered their cars would be appreciated.
Cheers in advance.