PDA

View Full Version : new brakes



SGHOM
02-02-2004, 12:04 PM
It's all payout on these b****y cars !! :( just ordered racing groove discs, front & rear & ferodo racing pads !! not sure how much yet, but a bit cheaper than online............ I hope !!

Spirit
02-02-2004, 03:41 PM
How much and which Ferodo pads Derek ?

My contact sells us the National Racing 8 groove discs and front Ferodo DS2500 pads for approx £220

SGHOM
02-02-2004, 04:18 PM
EBC grooved discs, front & rear. + ADL racing pads, front & rear. £400 all in ?? couldn't get the ferodo pads for some reason, said they were import only ???
getting them fitted thurs 12th,

SGHOM
04-02-2004, 09:28 PM
anyone got 10 minutes spare to fit these for me ???

enigma
05-02-2004, 12:31 AM
It'll only take 5!!! :-D

jerryd_33
26-02-2004, 08:24 PM
hello people , put a post on the wrong topic instead of here . well i am looking to buy a VR-4 as soon as i get my MERCEDES C230 KOMPRESSOR sold , but in the meen time would like some info. , on the standard size of the brakes for the VR-4 and should i need to up-grade them please ?

Nick Mann
26-02-2004, 09:12 PM
Not sure on the standard size, but upgrading is considered a very good idea. Either upgrade the discs/pads keeping the calipers or go to 17" wheels which allows the clearance for one of the evo systems to be put on. If you are driving only on the road, the standard brakes are pretty much up to the job. If you drive hard then an upgrade is a good idea, and if you plan to do track days then go for 17"'s and bigger disks.

All the above applies to the front of the car - most people agree that the back is good enough.

zedy1
26-02-2004, 09:59 PM
i think the size for the discs are 294mm front
264mm rears

Roadrunner
26-02-2004, 10:01 PM
Standard front discs are vented 294mm with 2-pot sliding calipers, rears are vented 284mm with 1-pot sliding calipers. As others have said, depends how you drive. These are serious brakes and work well in normal driving conditions. If you like to press on a bit though, and specifically if you want to do track days, their performance starts to degrade as they get hotter. Upgrades aren't too dear though - anything from around £400 for discs and pads all round with standard calipers, through around £800 for second-hand Brembos (ex-Evo, 4-pot front, 2-pot rear) with discs (320mm front, 302mm rear) and pads, up to around £3,500 :eek: if you want to go for brand spanking AP Racing 6-pot fronts, 4-pot rears with 330mm/302mm discs.

Anything larger than the standard discs will require bigger wheels - any of the above will fit under 17" rims. If you go up to 350mm front discs, you'd need 18"s. If you go for the larger calipers, make sure the wheel offset will accommodate them.

Brian

jerryd_33
29-02-2004, 02:05 AM
thanks people , for the info it is all good what everyone has said , especially H7 . the added info of the approximate pricing for the necessary bits was a bonus as i was dredding the costs would be skyhigh .

simpsonm
16-03-2004, 12:29 PM
Hi

I have been looking through the posts on brakes and just wondered whether anyone can answer me this.

I have a VR4 on a 'V' plate registered in 1999 and it is the saloon version.

I have just had my 54000 mile service and the motor requires new front discs and pads.

I want to buy replacements for the standard brakes, but uprated i.e. grooved or drilled and grooved.

I cannot find a supplier for the discs. The pads (ferrodo are the most mentioned) I am assuming I can get these from any supplier?

Does anyone know where I can buy what I want from and if so any idea on what I need to ask for???


Cheers

Mick

:rolleyes5

enigma
16-03-2004, 01:03 PM
Look HERE (http://www.clubvr4.co.uk/forum/showthread.php?t=1496&highlight=rotordiscs) for the upgrade that I did! The chaps at rotordisc are very helpful indeed! :D

simpsonm
16-03-2004, 01:44 PM
Do they stop your motor ?

enigma
16-03-2004, 02:20 PM
They appear to provide the required force!!!!

Spirit
16-03-2004, 07:10 PM
or my contact can supply National Racing 8 groove discs and Ferodo DS2500 pads for approx £230 inc VAT and P+P !

simpsonm
16-03-2004, 10:55 PM
I am awaiting a response from rotordisc as we speak. However for your solution spirit do you have the contact details or do we go through you mate?

Spirit
17-03-2004, 12:30 AM
Just call Woodford Garage Motorsport on 01803 863958 and ask for Simon - make sure you say Pete from Club VR4 sent you. ;)

simpsonm
17-03-2004, 05:38 PM
Hi

Called your mate Simon, price of £240 for the discs and pads to my door. Done the deal. Should receive em before weekend (fingers crossed). Ooohh I'm gonna have a mod to list against my car!!!

Spirit
17-03-2004, 06:33 PM
Good call mate - hope you're as pleased with them as me and several others here are ;)