clock & denso u-groove spark plugs

[Biggie_Smalls]

my clock comes on when i start the car, but goes off after about 1 min. anyone know whats wrong. is it ok to use Denso's U-Groove spark plug on my car. cheers.

[richy rich]

The clock on these are a pain in the ass. All you have to do is take it out and re-solder the joints.

As for the plug's I don't know.

[richy rich]

Oh and /Welcome

[Biggie_Smalls]

thanks m8, i will try that, i must say this forum is very helpful and the guys here are just the same, thanks to one and all for the help so far, as i get to learn the car better maybe i will be able to help someone also.

[richy rich]

No probs, do a search on spark plugs there is masses of info on them. Nick Manns last thread was a good 1 and the plugs he went for are good ones.

[Physician]

If you have Denso suppliers out there then the part number for the platinum plugs for our VR4's (8 Generation) are Denso PK20PR-P8.

NGK do an equivalent and you can also get Iridium plugs but they are more expensive. The platinum ones will easily last 40,000 miles.

[richy rich]

if you you are going for more power go 1 colder which are PK22PR-P8.