PDA

View Full Version : Whats size offset, width and centre bore are the standard 17" Sport/Elegance wheels?



kamal
20-03-2008, 03:22 PM
Whats size offset, width and centre bore are the standard 17" Sport/Elegance wheels?

Thanks in advance.

Nick Mann
20-03-2008, 05:38 PM
From memory, +50, 7", 67.1mm.

If you are spending a lot of money, please check my answers before proceeding!

bradc
20-03-2008, 10:12 PM
Are you looking at replacing them? Any width and offset combination that fits on a VR-4 will fit on any other Galant. The important thing is to look for a 4x114.3 wheel

kamal
21-03-2008, 01:00 AM
Yes I'm thinking of replacing them but i want to get as close to standard size as possible.

Nick Mann
21-03-2008, 11:19 AM
As Brad says - the VR4 fitment guide will work with your car, except for the fact you need four stud not five. The offset should not get higher than 50, and should ideally reduce, especially for a wider wheel.

For an 8" wide wheel, you need an offset of around 35 to 38.

N9nebar
23-03-2008, 11:21 AM
Dunno where i got the info from but ihave it written down on a piece of paper in front of me it says....... pcd 4x114.3,offset 35mm-45mm,bore 67.1......... also find this site usefull http://www.miata.net/garage/tirecalc.html

kamal
23-03-2008, 01:26 PM
Dunno where i got the info from but ihave it written down on a piece of paper in front of me it says....... pcd 4x114.3,offset 35mm-45mm,bore 67.1......... also find this site usefull http://www.miata.net/garage/tirecalc.html

Thanks, try this http://www.1010tires.com/TireSizeCalculator.asp