View Full Version : EVO Box
wagonboy
28-08-2008, 10:45 AM
Well after doing some research i found out that the EVO GT-A runs the same W5A51 auto box as the legnum, and that the bell housing is the same on 4G63 as 6A13TT. Can anyone confirm this at all or know where i could get some more info on this ??
If this is the case ill get hold of some manual linkages, shifter and clutch setup and be done with it
firsty things first..
search is you friend... USE IT!
look its right here....
uploaded/1576/1219917430.jpg
AND! the GT-A is auto. not manual
short answer,
NO. evo box's don not suit our cars.
the bell is different and so it the final drive so it does no match the diff ratio.
it will be no good for a manual conversion on a 6a13
Eurospec
29-08-2008, 08:51 AM
Yeah, the bell housings are different.
6A12 and 6A13T share bell housing patterns, 4G63 is different.
Cheers,
Ben.
not all of them,
some 6a12s are the other way round.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.