PDA

View Full Version : EVO Box



wagonboy
28-08-2008, 10:45 AM
Well after doing some research i found out that the EVO GT-A runs the same W5A51 auto box as the legnum, and that the bell housing is the same on 4G63 as 6A13TT. Can anyone confirm this at all or know where i could get some more info on this ??

If this is the case ill get hold of some manual linkages, shifter and clutch setup and be done with it

Gly
28-08-2008, 10:52 AM
firsty things first..

search is you friend... USE IT!

look its right here....

uploaded/1576/1219917430.jpg



AND! the GT-A is auto. not manual

short answer,

NO. evo box's don not suit our cars.

the bell is different and so it the final drive so it does no match the diff ratio.

it will be no good for a manual conversion on a 6a13

Eurospec
29-08-2008, 08:51 AM
Yeah, the bell housings are different.

6A12 and 6A13T share bell housing patterns, 4G63 is different.

Cheers,

Ben.

Gly
29-08-2008, 09:46 AM
not all of them,
some 6a12s are the other way round.