who's had the biggest drop?

[stevolution]

what springs can i buy. i'm looking for a substantial drop. car sits pretty hi. what's been done before?

[ANTHONY]

i fitted some RS*R springs but had to take them off as it was undrivable in London with all the speed bumps kept whacking the exhaust

[stuey]

Get some adjustable coil-overs, you can set it as low as you fancy,



(or as your wallet can handle replacing the tyres due to camber issues. !!!!)

[stevolution]

i fitted some RS*R springs but had to take them off as it was undrivable in London with all the speed bumps kept whacking the exhaust



do you still have them?

[Subaru ETA]

i had tien coilovers in my legnum. it was lower than anthonys one

[bradc]

If you want to have a legnum with a really low rear end, try fitting Galant lowering springs. The rear tyres will disappear into the arches :)

[stevolution]

If you want to have a legnum with a really low rear end, try fitting Galant lowering springs. The rear tyres will disappear into the arches :)

now that's what i'm talking about

[chris vr4]

do you still have them?


no he doesnt as i bought them but they are still sat in my shed lol

just dont have time to fit them atm

[Johny]

http://www.trademe.co.nz/Trade-Me-Motors/Cars/Mitsubishi/Galant/auction-174508583.htm

[d i c k i e s]

lol, yeah get some bags!

[Eagleton]

I have D2´s on mine and I cant eaven get an ordinary lift under my car. I have to roll it up on some wood first. I think the lowest part of my car (transmissionbox) is about 4cm from the ground.
http://i50.photobucket.com/albums/f338/Eagleton/IMG_0017-1.jpg
http://i50.photobucket.com/albums/f338/Eagleton/IMG_0036.jpg

I think it looks awesome but it´s not that apprichiated(spelling?) when stopping and rolling over speedbumps at 1 km/h. I´ve set the D2´s really hard so that the car doesnt take any damage underneath.

[Davezj]

when i first bought mine it had lowering springs on and i could only just fit my clenched fist on its side under the front to back cross member.

which was too low for me, speed pump in manchester.

i have standard springs on now, but not for much longer as i have some Tein HA's.

[shaun1978]

i'm just wondering if anyone else has issues with aftermarket dump valves, the vaccum pipe rips off on mine occassionally when going oer bad speed bumps at standard height , so im thinking lowering is gonna make it worse. It could always be because the standard shocks are shot and i suppose it could be diving more than usual.