PDA

View Full Version : WTB: Oil cooler ~ small



Fully
05-10-2008, 09:05 AM
Small oil cooler for power steering.
Size around 150mm high - lengh no bigger than 400mm.
smaller the better?

Nutter_John
05-10-2008, 09:09 AM
err why ??

when i fitted my intercooler i just made the standard one a little smaller and it worked fine for over a year with some agressive track sessions in there as well

Munta
05-10-2008, 07:29 PM
when i fitted mine i removed it all together and its been working fine for 2 years now and also with track abuse

thfelipeth
06-10-2008, 11:23 AM
when i fitted mine i removed it all together and its been working fine for 2 years now and also with track abuse with some harcore aggresiveness and perseverance i got mine around my new intercooler like it was mounted on the old one...!

Fully
07-10-2008, 08:27 AM
err why ??



Cause I tried to bend it too far. :p
It just snapped, thought I could get away without using the pipe bender.
Had most of it straightened out.

Nutter_John
07-10-2008, 08:29 AM
ah ok , all i did was cut off the end that is looped back 180 degrees and the stick the two pipes into this , gives it a little cooling but not much - never had any issues with it though