PDA

View Full Version : FS: Breaking legnums



psbarham
27-12-2008, 09:48 AM
Right these have been sitting around for too long now, and tbh i'm sick of the sight of them and they are sat right in the middle of the planned veg plot so they have to go.

We have a loads of odds and sods left but no engines or gear boxes left though :(
we do have a variety of diff's left though (possibly a sayc one as well) and a few assorted propshafts, driveshafts etc

we also have 2 complete cloth legnum interiors and 1 beige leather legnum interior.

there is also a facelift front bumper (without the lights)

a wood steering wheel/gear knob(auto)/handbrake cover set available

if you need anything then just ask, you never know we may have it:scholar:

martin_y
27-12-2008, 09:42 PM
Tow hook cover in white?

psbarham
27-12-2008, 10:51 PM
Tow hook cover in white?

nope, anyway it'd be cheaper from mitsu by the time you add postage

ANTHONY
27-12-2008, 11:51 PM
climat control unit?

Wodjno
28-12-2008, 12:19 AM
climat control unit?

Tink we got wanna dose kicking about.. will letcha know t'moras /yes

But it doesn't come with a free Badge :)

martin_y
28-12-2008, 08:40 AM
Left front monsoon shield?

MikeKey
28-12-2008, 09:18 AM
Might need a diff or at least spares from one once the source of my drivetrain knocking has been identified.

PM sent...

elnevio
28-12-2008, 09:20 AM
Now's the opportunity to upgrade to the S-AYC diff! /rally

psbarham
28-12-2008, 10:04 AM
Left front monsoon shield?

we have a full set, not really willing to split them as the chances of selling the other three are slimmer than Kate moss on an all celery diet

martin_y
28-12-2008, 06:52 PM
'k, how much for the full set, then?

V6-24
29-12-2008, 07:12 PM
how much for the wood steering wheel/gear knob(auto)/handbrake cover set?

psbarham
29-12-2008, 11:09 PM
'k, how much for the full set, then?


how much for the wood steering wheel/gear knob(auto)/handbrake cover set?

you have pm :D

wantavr4
30-12-2008, 04:01 AM
You know anyone who has the rear boot spoiler for a 2002 vr4 saloon?

bradc
30-12-2008, 04:16 AM
http://www.ozvr4.com/forums/showthread.php?t=4364

That guy wants a gearbox case, I figure you guys must have at least one broken gearbox around that you could dismantle and send the case off to him? I think he wants the main part of the gearbox case, not the torque converter housing.

Wodjno
30-12-2008, 09:41 AM
http://www.ozvr4.com/forums/showthread.php?t=4364

That guy wants a gearbox case, I figure you guys must have at least one broken gearbox around that you could dismantle and send the case off to him? I think he wants the main part of the gearbox case, not the torque converter housing.

No we haven't.. But i think Mark4 has /yes

RobboVR4
30-12-2008, 11:37 PM
PM'd

apeman69
31-12-2008, 02:53 AM
Passenger side tweeter cover with clips that aren't broken?

Glovebox fixing brackets (the plastic things that attach the back of the glovebox to the metal frame behind glovebox and, when not broken, stop the glovebox falling to the floor when you open it)? Snapped one fitting the carPC!

Jules86
31-12-2008, 10:51 AM
do you got the sedan boot lid without the rear spoiler up for sale?

Atik
31-12-2008, 02:24 PM
Any chance you have the switching controls for heated seats? Normally sits in one of the front cupholders.

Its the only thing holding me back from installing my recently purchased interior.

venomboy
31-12-2008, 05:58 PM
Electric window system black box? (not the switches, it's hidden in drivers side door.)

psbarham
31-12-2008, 08:48 PM
Passenger side tweeter cover with clips that aren't broken?

Glovebox fixing brackets (the plastic things that attach the back of the glovebox to the metal frame behind glovebox and, when not broken, stop the glovebox falling to the floor when you open it)? Snapped one fitting the carPC!

not sure i'll have to have a look at the weekend
and nope, unfortunately no glove box clips here:(


do you got the sedan boot lid without the rear spoiler up for sale?

Nope sorry :(


Any chance you have the switching controls for heated seats? Normally sits in one of the front cupholders.

Its the only thing holding me back from installing my recently purchased interior.

nope sorry :(


Electric window system black box? (not the switches, it's hidden in drivers side door.)

99% sure we have, i'll check at the weekend and let you know

MarkSanne
01-01-2009, 10:37 AM
I'd be interested in the front bumper, grille, sideskirts, wind-visors & scuff plates.

psbarham
01-01-2009, 02:17 PM
I'd be interested in the front bumper, grille, sideskirts, wind-visors & scuff plates.

bumper - pre or post facelift?

Grill - as above

wind deflectors - poss already sold, will put you as reserve

scuff plates - we only have the standard plastic ones left

MarkSanne
01-01-2009, 06:32 PM
bumper - pre or post facelift?

Grill - as above

wind deflectors - poss already sold, will put you as reserve

scuff plates - we only have the standard plastic ones left

Bumper+grille: don't mind, either (pre/face) or even both! I need to build up a bit of stock of these :).

Scuff plates: thought so, I'm -as anyone- specifically looking for the stainless ones.

Thanks!

shaun1978
01-01-2009, 09:09 PM
temporary windscreen repair pins?

zedy1
01-01-2009, 10:33 PM
Bumper+grille: don't mind, either (pre/face) or even both! I need to build up a bit of stock of these :).

Scuff plates: thought so, I'm -as anyone- specifically looking for the stainless ones.

Thanks!


I have some stainless scuff plates, infact i may even have 2 or 3 sets :pimp2:

zedy1
01-01-2009, 10:35 PM
Guys if theres anything Paul or Glenn dont have you can always pm or call me

elnevio
01-01-2009, 10:36 PM
I have some stainless scuff plates, infact i may even have 2 or 3 sets :pimp2:
Do you have a set for a Legnum (i.e. including the rear bumper one)?

zedy1
01-01-2009, 10:55 PM
Do you have a set for a Legnum (i.e. including the rear bumper one)?


Need to check if it has the bumper pieace on it

MikeKey
01-01-2009, 11:47 PM
I have some stainless scuff plates, infact i may even have 2 or 3 sets :pimp2:

PM sent :)

SGHOM
01-01-2009, 11:49 PM
Do you have a set for a Legnum (i.e. including the rear bumper one)?

you only want that cus you saw my car today !! :afro:

Wodjno
01-01-2009, 11:58 PM
you only want that cus you saw my car today !! :afro:

And to be honest.. The Boot one only looks good on a Silver Legnum /yes

They look Tacky on any other colour car.. :sick:

I suppose it could be colour coded :thinking:

psbarham
03-01-2009, 10:17 AM
Bumper+grille: don't mind, either (pre/face) or even both! I need to build up a bit of stock of these :).

Scuff plates: thought so, I'm -as anyone- specifically looking for the stainless ones.

Thanks!

sorry for the delay

we do have a facelift front bumper in meister blue, but no grill

and we have pre facelifts bumpers and grills in black and silver,

psbarham
03-01-2009, 11:53 AM
Passenger side tweeter cover with clips that aren't broken?

Glovebox fixing brackets (the plastic things that attach the back of the glovebox to the metal frame behind glovebox and, when not broken, stop the glovebox falling to the floor when you open it)? Snapped one fitting the carPC!

no and no, sorry :(

psbarham
03-01-2009, 11:56 AM
Electric window system black box? (not the switches, it's hidden in drivers side door.)


the only black boxes i can find to do with the windows are the switch, the gubbins attached to the motor, and the etacs unit down in the drivers footwell, this controls all the windows sunroof mirrors and locking.

which bit do you want?

psbarham
03-01-2009, 11:58 AM
Left front monsoon shield?

do you want these?

Wodjno
06-01-2009, 08:31 PM
Also have loads of other engine bay bits.. Including front Strut Brace..

2 x AYC diffs

Set of standard front discs and calipers.. Also 2 sets of rears..

VR4 Tailgate spoilers.. 1 Black and 1 Meister Blue.. Nice upgrade to a standard estate rear end..

Also VR4 Side Skirts.. 2 or 3 sets.

Loadsa other bitz to /yes

Also some upgrades:

Innovate LC-1

Innovate XD-1

Emanage Blue + Support Tool


3 x Pro Sport Gauges for Oil Pressure, Oil temp and Turbo Boost Pressure..

Oil sandwhich plate with inputs for temp and pressure..

Tre Fuel Pump.. 255lph..

EMB Ignition harness 38 30

e-01 - EMB pressure sensor 24 19
EMB external signal harness 24 19

afr harness 24 19






AFR gauge

pitslayer
07-01-2009, 02:28 AM
rear wheel bearings? one is starting to sound like a lancaster now.

psbarham
07-01-2009, 07:57 AM
rear wheel bearings? one is starting to sound like a lancaster now.

yes we have some, but second had????? is there any pattern one available? i'm a bit reluctant to flog parts like that on due to the nature of the parts and the wear they incur, i wouldn't want it on my concious if the unthinkable happens. if there is no other options available to you then PM me and i'll sort one out

bradc
07-01-2009, 08:07 AM
Come on PSB, go for it!

Wodjno
07-01-2009, 01:05 PM
Come on PSB, go for it!

Yeahh !! It's only PITS :inquisiti

While your at it ... Can you Flog Mr B Radc a couple aswell :inquisiti

pitslayer
07-01-2009, 03:30 PM
yep, anythings better than the one thats on there now,

keithatport
07-01-2009, 07:49 PM
hi, do you have any auto gearbox solenoids?

Keith

psbarham
07-01-2009, 09:59 PM
yep, anythings better than the one thats on there now,
if you really want them and understand that if you come on here in X months time saying they have failed and giving me a load of abuse then you must realise that you will get a short short answer from me, plus i'll have your home address ;) :D

I shall find the best one for you at the weekend and let you know, just remind me on saturday morning though /lol

psbarham
07-01-2009, 10:00 PM
hi, do you have any auto gearbox solenoids?

Keith

only as part of a gearbox that we will not split

pitslayer
07-01-2009, 10:36 PM
thats fine, its only a temporary one :)

martin_y
08-01-2009, 07:47 AM
do you want these?

Yes, Ok, I will take them. PM sent...

shrew
08-01-2009, 03:43 PM
Hi PS

would you have a good brake master cylinder?

if so how much with postage to nottingham please?

thanks

shrew

psbarham
08-01-2009, 10:01 PM
Hi PS

would you have a good brake master cylinder?

if so how much with postage to nottingham please?

thanks

shrew

Yup, you have pm

chrisvr4
08-01-2009, 10:22 PM
hi. have you sold the wind deflectors? if not are they the genuine mitsubishi ones? how much?
cheers
chris.

psbarham
08-01-2009, 10:25 PM
hi. have you sold the wind deflectors? if not are they the genuine mitsubishi ones? how much?
cheers
chris.
sorry sold, well unless you are willing to pay £1K for them /lol

chrisvr4
08-01-2009, 10:28 PM
call it £999.99p then you have a deal lol :D cheers anyways.

psbarham
08-01-2009, 10:30 PM
call it £999.99p then you have a deal lol :D cheers anyways.

+postage and your on :D

chrisvr4
08-01-2009, 10:35 PM
ay 1p for postage :D

sebring vr4
04-11-2009, 05:06 PM
got an engine harness

psbarham
05-11-2009, 07:53 AM
got an engine harness

erm, i don't think so, i'll check tonight

dicko206
05-11-2009, 08:09 AM
How much for the leather interior?

psbarham
05-11-2009, 07:35 PM
right to stop people asking if stuff hasn't sold after nigh on a year, all that is left of value is
2 ayc diffs in good condition
1 low mileage ayc pump
glass
1 moonroof glass
1 wood steeringwheel
1 auto hi viz dash
1 manual hi viz dash
a few odds and ends of trim
2 aircon pumps
1 power steering pump
2 master cylinders
2 abs units
1 4spd auto box with t/c and driveshafts
1 4spd tiptronic box with t/c and driveshafts
1 1.8 gdi jap spec (140bhp) engine with all the ancillary's including ecu's etc
1 1.8 gdi engine, uk spec
1 set of 17 Inch alloys that are simliar design to the evo 7 ones, the tyres are fooked
I will not sell any second hand suspension parts due to the potential issues with balljoint etc failures

bradc
05-11-2009, 07:38 PM
how many miles is on the manual hi viz?

psbarham
05-11-2009, 07:42 PM
how many miles is on the manual hi viz?

i dunno, i'll go and check, back in 5

psbarham
05-11-2009, 07:51 PM
how many miles is on the manual hi viz?

63165

psbarham
05-11-2009, 07:52 PM
got an engine harness

it looks like i have a complete manual engine harness. hopefully i will get a chance to look in daylight hours on saturday to make sure it hasn't been molested in anyway

bradc
05-11-2009, 08:03 PM
How much do you want for it?

psbarham
05-11-2009, 08:08 PM
How much do you want for it?


you have pager

spm01
07-11-2009, 08:07 PM
you have PM

pedro
14-11-2009, 09:31 PM
any chance of a tcl chamber???

psbarham
14-11-2009, 09:34 PM
any chance of a tcl chamber???

unfortunately I don't have one, sorry :(

pedro
14-11-2009, 09:37 PM
TCL chamber?

Edit: sorry didnt see reply...derrr