PDA

View Full Version : FS: Original Mitsubishi gauges (rare)


dutch driver
14-01-2009, 06:44 PM
for sale

the 3 gauges
boost, temp and volt
i have it in the workshop in japan.
it ready to shipped to holland in the box.
but i have a couple days to take it out and let it come with airplane if you whant to have i quick.
when it's on the boat it take something around 40 days and with plane 7 days.
the gauges are in perfect condition.
230 pounds with boat
270 pounds with plane
the prices are not included shipping to the uk.
shipping is 20 pounds
http://i2.photobucket.com/albums/y50/MADeenski/8g-gauges-mitsu-1din-volt-temp-turb.jpg
http://i2.photobucket.com/albums/y50/MADeenski/8g-gauges-mitsu-1din-volt-temp-t-1.jpg
http://i2.photobucket.com/albums/y50/MADeenski/8g-gauges-mitsu-1din-volt-temp-t-2.jpg
http://i2.photobucket.com/albums/y50/MADeenski/8g-gauges-mitsu-1din-volt-temp-t-3.jpg
dutch driver
14-01-2009, 06:45 PM
i can also take it with me to japfest in may.
chris g
14-01-2009, 09:24 PM
Will there be any problems with fitting...?

Suitable for connection to a VR-4...?
dutch driver
14-01-2009, 10:03 PM
don't know if the plugs are fitting the vr4.
otherwise you have to take the plugs off and connect the + and - and the signal.
it's very simple to do.
TAR
14-01-2009, 10:49 PM
Will there be any problems with fitting...?

Suitable for connection to a VR-4...?

Chris, these will be from an Evo.

:happy:
chris g
14-01-2009, 11:38 PM
And so the fittings/connections/functionality will not be a problem at all...?

Will connect and work without problems...?

Problem of the bracket/mounting is another thing...
TAR
15-01-2009, 12:09 AM
From looking at them it appears that the boost guage is just connected using a vacuum pipe and a + - supply for the backlight.
The volt meter will just need a + - supply to work
The temp guage will need to be connected to a suitable sender unit either for oil or water temp.

I would say that for certain you would need to remove the multiplug.


:happy:
zedy1
15-01-2009, 01:28 AM
Multiplug will fit straight into the stereo harness
boost gauge will require a pipe and t piece
volt already connected and working vial multipluj
temp gauge will require a sendor unit
TAR
16-01-2009, 12:06 AM
just noticed that the boost guage only goes up to 1 bar....a little odd maybe?

So I retract my earlier statement that they come from an Evo.

:happy: