Auto gearbox wiring info

[peter thomson]

I'm checking the wiring to and from the ecu at the moment and as far as I know the only info is in the UK and jap manuals I have downloaded. This gives me info on voltage at various points but not where for example the power for the ecu is comimg from.
My main interest is the solenoid supply at the moment .Any info on where these supplies are would be great.

[Davezj]

i will see what i can dig up.

i got some ecu wiring diagrams i will see if i can find them and post them up.


Back later.
not sure what ecu they are for though.

[peter thomson]

Thanks Dave :thumbsup:


i will see what i can dig up.

i got some ecu wiring diagrams i will see if i can find them and post them up.


Back later.
not sure what ecu they are for though.

[Davezj]

they say they are 6A1 T/C M/T which can only think is traction control and Manual Transmission

25857

25858

25859

25860


Sorry i think this is a engine ECU.

[peter thomson]

Thanks Dave that should help a lot. Going by the ecu pinouts between the VR4 and N/A gearbox there seems to be a lot of similarity. Rep added

[Davezj]

This might help.


25861

it is a few doc rolled in to one.

i got these from all over the place on here.

[peter thomson]

Thanks again Dave:scholar:


This might help.


25861

it is a few doc rolled in to one.

i got these from all over the place on here.

[alex k]

If you only need infos about power and ground source you can also use the wiring from a nonturbo V6 or 2,0l SOHC A/T-ECU. the pinout is also the same. only there is one solenoid more on the vr4-s one and the coulors maybe not the same. and there are some more for awd-ecu and tcl-ecu

[peter thomson]

Yes I have the wiring diagrams just have to get a bit of time to check it all