FS: Greddy hose

[stuartturbo]

Few bits left in shed


Greddy radiator hose £40
Engine mounts £40plus postage



drivers side engine mounting but not have the gearbox mounting
The rear roll stopper and a brand new front roll stopper. These are the mountings that go fore and aft of the engine. The front one bolts to the engine cradle and the rear one bolts to the suspension cross member.

Apart from the new one they all came off a car with 33,000 miles on the clock and are in good nick.

[Beastlee]

Stuart, I'll take the engine mounts if they're what I need. Can you tell me what you have please.

Is the greddy pipe the alloy one with silcone fitments?

*EDIT* Sorry in my rush to snaffle the engine mounts I didn't read the whole thread. You have all the bits I need to repair my mounts, I'll take them. PM on the way.

[stuartturbo]

Pm'd the pipe is the alloy one with silcone fitments and a 1/8"bsp?? hole in

[Beastlee]

Yep, that's the one. Excellent kit for anyone who's interested in it. The hole is for a temperature sender if anyone is wanting to fit an additional gauge, if not it has a bung in it.

[stuartturbo]

Obviously offers may be considered on the hose

[stuartturbo]

bump for the hose

[peter thomson]

Surprised this hasn't sold. Most VR4's will still have the original hose. My one was starting to fail internally and Keiths was expanding by a scary amount. We both have these fitted and are a good upgrade as well as a precaution against a burst hose.

[yetphoenix]

pm sent