View Full Version : V6 clutch
psbarham
18-06-2009, 10:19 PM
before the smart arse's start yes I've searched, and got bored after page 8/Grrr
can anyone recommend a good uprated clutch for the v624?
there's a couple on fleabay but they are of unknown make a quality, the last thing i need is a complete pup of a clutch:thinking:
bradc
18-06-2009, 10:46 PM
The V6 clutch is 225mm, while a VR-4 is 240mm, so a VR-4 one won't work. However the EVO 4-6 is 220mm and could possibly be compatible. Have you looked into that route at all? Perhaps there will be a stock EVO 4-6 one on the MLR for next to nothing
ANTHONY
18-06-2009, 10:48 PM
have you asked Camskill?
Nutter_John
18-06-2009, 10:48 PM
evo 4-6 is 230 mm brad
what about an fto clutch Paul , or try Helix as they may have something close
bradc
18-06-2009, 10:55 PM
MD741009 and MD745530 are the part numbers for a 4wd ST-R
MD748042 is for a mivec fto
MD741736 and MR446227 are for a 2wd ST-R (uk V6)
They are all listed as 225mm. I don't know if fto ones would work or not!
The Vee
19-06-2009, 03:37 AM
Rpw sorted mine. Think it was based on FTO (6a12) but can't honestly remember exactly. 225 does ring a bell though
psbarham
20-07-2009, 09:33 PM
right just to update this, an FTO one fits, i brought mine from HERE (http://stores.shop.ebay.co.uk/JUSTCLUTCH) and received excellent service, and it was bloody cheap too :D
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.