PDA

View Full Version : HKS EVC Help


mk112
16-06-2004, 10:12 AM
Hi,
I have got a HKS EVC on my vr4.

when I push the "Mode" button, I can change between setting HI/LOW/MANUAL boost, there also a figure "70" can be displayed, what does that figure mean?
Thanks.
pjjohnson
16-06-2004, 02:15 PM
Which model EVC is it ?

On the mark 4 version there is a something called 'offset', which ranges from 50 to 150. Default setting is 100. You can adjust it so that the actual boost achieved is the same as what you have set it at.
mk112
16-06-2004, 02:49 PM
It looks like Version 4 pretty much, but it does not have the rotary switch. Other four buttons are same as Ver.4 but they are two on each side of the screen.
newsboyben
22-07-2004, 02:22 PM
Hey mate...I just got a HKS EVC put in the other day.....the 70 is equal to .7 bar or 10psi.....and 100 equal to 1.0bar.....if u want to know any more about it let me know...