1 Piece Fibreglass Undertray

[VR4WGN]

well heres the 1st Undertray,complete fibreglass and good for those without them ,definatly completes the car i think!

enjoy
comments welcome please

[scott.mohekey]

Funny, I was just thinking yesterday we should get you to make these! I must have missed it earlier.

What sort of price are we talking?

[rees]

are these just to replace the originals or is it an aero mod?

[VR4WGN]

Funny, I was just thinking yesterday we should get you to make these! I must have missed it earlier.

What sort of price are we talking?

the saying ," I Don't kiss and tell" lol
yea i only started the mold last week,and i shaved a few items on it so it flows easier

[VR4WGN]

are these just to replace the originals or is it an aero mod?

Original Replacement dude,what did you hve in mind?

[rees]

i thought maybe it was towards flattening the under belly of the car to reduce drag , that was all

[VR4WGN]

well it is actually,its flat and uv curved all sharpe bends into flowing motions

[Wodjno]

Nice work /yes

How much for a Bulk load of say 10 to the UK ?

[chris g]

Yes, a few of us could be interested in those...

[VR4WGN]

email me dirct mate,i could look at a discount on such bulk
emal me q_customs@xtra.co.nz

[Davezj]

Nice work /yes

How much for a Bulk load of say 10 to the UK ?

i would be interested in an under tray for the right price of course.
cheers Dave

i was going to see if i could make a flat one in ally, but it all takes time.

[VR4WGN]

i would be interested in an under tray for the right price of course.
cheers Dave

i was going to see if i could make a flat one in ally, but it all takes time.

that is do -able Dave but due to different height pikup points it makes the folding difficult,but not a bad thought lol

[PaddyB]

I'm interested...

[VR4WGN]

I'm interested...

cool well there seems to be a HELL of alot of interest in this item for the UK boys so maby ill list a poll in the UK traders forum and then whomever polls will be entered into the group buy then,and save on freight,then maby elnevio or someone high up can recieve and distribute or however

[elnevio]

maby elnevio or someone high up
Flattery will get you EVERYWHERE! /haz

[Gly]

question about fiment (never having had one of this on either of my legnums)

are pre and post facelift the same?? (dunno if different front bumpers affect fitment?)

[bradc]

Strangely the same part code is used from 1996 to may 1999, then it changes all the way through to 2002. I'm not sure what the difference is, but the one on my purple VR-4 is from a PFl and the broken one I have in my shed is from the 2001 half cut, they are identical. The change in may 1999 would also imply that there is no problems fitting the first model to either front bumper, so I doubt the second part number would have any problems either.

[Wodjno]

I think they did a total reshuffle on Part numbers around the time of the Facelift.. But nearly all parts are the same..

[VR4WGN]

Flattery will get you EVERYWHERE! /haz
if your good your good correct? no use denying it lol
thanx :cowboy:

[VR4WGN]

question about fiment (never having had one of this on either of my legnums)

are pre and post facelift the same?? (dunno if different front bumpers affect fitment?)

i think theyr correct there,although fitting mine lastnight i noticed alot of unused holes,seems i only needed to tuck it under the bumper and clip and on the X-member 3 places then on the chassis rail covers eitherside wich where fastened to the splashguards,and thus its tight as, im not going to supply the holes drilledas owners may not want all the holes in

[confusis]

Would this be the same item as for a ST-r? Might be interested in some aero mods when the car's fixed :)

[bradc]

Yep, it will fit on any Galant/Legnum

[VR4WGN]

Yep, it will fit on any Galant/Legnum

dont you sleep?? hmm bed time!!!! jsut finished making the mold hahahah/Banana

[confusis]

hmm wonder how much this would cost.. is this flatter than the factory tray (that's if i even still have one :S)

[bradc]

It is the same as the factory one, and you most likely won't have one.

[VR4WGN]

um overall its the same except iv rolled the edges,for easier flow and elimenated a few factory rivited hjoins to make it a 1 piece unit

[confusis]

ok.. what's the proposed price? undertray usually means better fuel economy...

[VR4WGN]

looking at $150 roughly,i havent had tiem to do cost etc but roughly works out to this price

[confusis]

ok. might be keen for one. easy to fit? will have to buy bolts if my car is missing the tray of course..

[Davezj]

that is do -able Dave but due to different height pikup points it makes the folding difficult,but not a bad thought lol

i was going to try to make it completely flat and use packer/spacers to pick up the holes on the mounting points. it would make the bottom of the car lower but no lower than the lowest point. and as long as all the edges are sealed then it should work. and give the same effect as the original factory one.

but if you can get an original fit copy why would you bother making one. that's why as long as the price is right i will have one from the UK buy if it goes ahead. but it is a shame to see all thia aluminium go to waste that i have in the shed. i am sure i will find a good use for it.

[VR4WGN]

i was going to try to make it completely flat and use packer/spacers to pick up the holes on the mounting points. it would make the bottom of the car lower but no lower than the lowest point. and as long as all the edges are sealed then it should work. and give the same effect as the original factory one.

but if you can get an original fit copy why would you bother making one. that's why as long as the price is right i will have one from the UK buy if it goes ahead. but it is a shame to see all thia aluminium go to waste that i have in the shed. i am sure i will find a good use for it.

your a VERY intelligent man im SURe you will find a use for it Dave lol
um yes these are a copy of the original but fit better than the original as it has a few upgraded areas on it i did and rolled edges instead of sharp edges,should add to the flow of air too...
um i will get a group buy/poll based listing up in the UK area,will catchup with elnevio 1st tho to confirm how and where
~Q~:elf:

[White Lightning]

Just for your information, the undertray on my PFL is held on with 14 clips:

3 into the centremember
2 into the transmission side plastic
3 into the engine side plastic
6 into the front bumper (2 of which also go into the bumper brackets)

[bradc]

That sounds about right, just substitue 4 of the front clips for cable ties :D

[miller]

silly question, no experience of fibreglass...how suitable is fibreglass at taking hits off the road? Ive noticed a few scrapes and gouges on mine ? and mine is stock height.

[VR4WGN]

well rememmber that the trays sustain alot of beatings ok,depending ofcourse on your conditions,my purpose for supplying these are merely for CITY or Local Town,NOT GRAVEL EXPRESS with crows Tails,however being fibreglass its repairable and cheaper to repair than that plastic(its hard to repair that composite plastic anyhow.
Fibreglass should offer the Same properties to the plastic being a fibre construction aswell fused in a resin

[VR4WGN]

hey all thor tid offer to CVR4 aswell im making undertrays this next 2 weeks so if anyone wants 1 theyll be $85 each and finished in a black gelcoat ,the usual rules apply,if its not paid for in advance its NOT Made FOR!!
i have 8-9 paid orders form Australia Already so if you want in pm me..

Nearly half the price i used to charge....(saved time in the laying process)

[scott.mohekey]

Put me down for one Q. PM me payment details.

[scott.mohekey]

Have these been completed? I noticed there was mention of undertrays being ready on OzVR4.

[rayray24]

Umm strange question, but I still have my factory one on and it has foam pads to soak the little drips of oil from the sump and gearbox.

Could this effect the carbon fibre??

[bradc]

They are ready, I saw them there last weekend :)

[Nube]

I'd definately be up for one of those if a UK bulk order did go ahead.

[c0xxy]

so would i

[VR4WGN]

well if 1 of you want to host the GB and distribute when it arrives then im al lfor putitng up a GB then

[scott.mohekey]

Q, has Main Freight contacted you about pick up yet? I've been on their case about using the correct phone number.

[VR4WGN]

yea they have theyr pickingup this week,was ment to be last fri but as everyone knew i was heading owta town

[scott.mohekey]

Sweet. Thanks Q. They're pretty hopeless.

[scott.mohekey]

Bump. Has this been picked up yet?

If not I will give them a call to give them a rark up.