nabassu
26-07-2009, 12:49 AM
(images broken, go to OZ:
http://ozvr4.com/forums/showthread.php?t=6728)
-2 Recaro seats from EVO (mine are from evo9)
-2 stock seats
-torx 40
-flat 12
-M8 and drill (? 6)
-flat metal 3-5mm x 5cm x 40 something cm
GO!
unscrew recaros rials and moveing handle.
one side is 1cm higher because of piece od pipe. we must gently cut the one from the back side, and place it i pair with the front one, addung something to compensate loss of material due to cutting process.
[URL=http://www.fotosik.pl/pokaz_obrazek/af193977c5b8e7ca.html
[URL=http://www.fotosik.pl/pokaz_obrazek/59aeb9373646a036.html
[URL=http://www.fotosik.pl/pokaz_obrazek/ca74d0bbc1c8c196.html
[URL=http://www.fotosik.pl/pokaz_obrazek/d0b43ee677eb2444.html
unscrew oryfinal seats rials.
we have 2 flat metal parts on back, and 2 unsymetrical parts in front.
in those on back, we drill holes, 3cm drom the old one. from center.
[URL=http://www.fotosik.pl/pokaz_obrazek/6660dc7ab53b333f.html
we must cut back of stock rials, because they cover the recaros.
[URL=http://www.fotosik.pl/pokaz_obrazek/f8158987cebae7b2.html
[URL=http://www.fotosik.pl/pokaz_obrazek/f47b93ee89ad7fcf.html
[URL=http://www.fotosik.pl/pokaz_obrazek/ab502e0536865270.html
we place recaro on the back, and put flat metal on old handle mounts and drill holes where screws will be (in recaro).
[URL=http://www.fotosik.pl/pokaz_obrazek/6ddc0765317bdd22.html
now we screw rials to the recaro tgru new holes on back.
[URL=http://www.fotosik.pl/pokaz_obrazek/1eb9d346092ea475.html
unsymetrical metal pieces holes supposed to be 3cm from recaros screws (from center)
now we mark, drill and use M8 (dont know the name, makes cuts in the hole so we can use screw)
[URL=http://www.fotosik.pl/pokaz_obrazek/cac5c6c8a6a71eeb.html
now we tighten all 6 screws
[URL=http://www.fotosik.pl/pokaz_obrazek/1d1fbe6e53970ae4.html
this mount have one problem, front of the seat is about 3cm higher, so our knees are high
[URL=http://www.fotosik.pl/pokaz_obrazek/e14c4cbc05de2cd6.html
[URL=http://www.fotosik.pl/pokaz_obrazek/9b8a3f656f3bd54b.html
you must modify.
i'm planning to beat up those unsymetrical mounts, to lower them and make holes in them.
or you can make new mounts from L-shape metal.
or weld.
or screw
:)
have fun
http://ozvr4.com/forums/showthread.php?t=6728)
-2 Recaro seats from EVO (mine are from evo9)
-2 stock seats
-torx 40
-flat 12
-M8 and drill (? 6)
-flat metal 3-5mm x 5cm x 40 something cm
GO!
unscrew recaros rials and moveing handle.
one side is 1cm higher because of piece od pipe. we must gently cut the one from the back side, and place it i pair with the front one, addung something to compensate loss of material due to cutting process.
[URL=http://www.fotosik.pl/pokaz_obrazek/af193977c5b8e7ca.html
[URL=http://www.fotosik.pl/pokaz_obrazek/59aeb9373646a036.html
[URL=http://www.fotosik.pl/pokaz_obrazek/ca74d0bbc1c8c196.html
[URL=http://www.fotosik.pl/pokaz_obrazek/d0b43ee677eb2444.html
unscrew oryfinal seats rials.
we have 2 flat metal parts on back, and 2 unsymetrical parts in front.
in those on back, we drill holes, 3cm drom the old one. from center.
[URL=http://www.fotosik.pl/pokaz_obrazek/6660dc7ab53b333f.html
we must cut back of stock rials, because they cover the recaros.
[URL=http://www.fotosik.pl/pokaz_obrazek/f8158987cebae7b2.html
[URL=http://www.fotosik.pl/pokaz_obrazek/f47b93ee89ad7fcf.html
[URL=http://www.fotosik.pl/pokaz_obrazek/ab502e0536865270.html
we place recaro on the back, and put flat metal on old handle mounts and drill holes where screws will be (in recaro).
[URL=http://www.fotosik.pl/pokaz_obrazek/6ddc0765317bdd22.html
now we screw rials to the recaro tgru new holes on back.
[URL=http://www.fotosik.pl/pokaz_obrazek/1eb9d346092ea475.html
unsymetrical metal pieces holes supposed to be 3cm from recaros screws (from center)
now we mark, drill and use M8 (dont know the name, makes cuts in the hole so we can use screw)
[URL=http://www.fotosik.pl/pokaz_obrazek/cac5c6c8a6a71eeb.html
now we tighten all 6 screws
[URL=http://www.fotosik.pl/pokaz_obrazek/1d1fbe6e53970ae4.html
this mount have one problem, front of the seat is about 3cm higher, so our knees are high
[URL=http://www.fotosik.pl/pokaz_obrazek/e14c4cbc05de2cd6.html
[URL=http://www.fotosik.pl/pokaz_obrazek/9b8a3f656f3bd54b.html
you must modify.
i'm planning to beat up those unsymetrical mounts, to lower them and make holes in them.
or you can make new mounts from L-shape metal.
or weld.
or screw
:)
have fun