PDA

View Full Version : manual boost controler


thorpe1983
16-08-2009, 04:40 PM
hi im new on here,ive got a manual boost controler and not sure were it goes on my legnam vr4,please can any one help with or without pics,thanks kev
chrisvr4
16-08-2009, 05:16 PM
Take a look here. :)

http://www.clubvr4.com/forum/showthread.php?t=19501
andydckent
16-08-2009, 05:19 PM
This one is better IMO

http://www.clubvr4.com/forum/showthread.php?t=39064&highlight=boost+gauge
bigoxo
16-08-2009, 07:17 PM
where are you Kev? Maybe someone on here can help if they're close by.
aboo
16-08-2009, 08:26 PM
Hi & Welcome. As Andy said his link is good.:whistle:
thorpe1983
19-08-2009, 01:14 PM
im in teeside,thanks for all the help,
thorpe1983
19-08-2009, 01:17 PM
its helped a little,i see were the blue pipe comes of but were does the other pipe go to,the black one,cheers
peter thomson
19-08-2009, 01:28 PM
The black one which should have a red tip comes from the boost solenoid and attaches to the inlet pipe in the pic
Turbo_Steve
19-08-2009, 03:34 PM
Mechanical?
aboo
19-08-2009, 05:30 PM
The black one is originally on the nipple that the blue pipe is connected to. You can cut it or as I did connect it to the bottom of The MBC & put another piece of pipe from the MBC to the nipple.
thorpe1983
20-08-2009, 10:09 AM
thanks again for the help
crazyken76
27-09-2009, 01:54 PM
im having problems with my boost i have turned it up but the guage is not going any higher than 0.5 what could be the problem ?
aboo
27-09-2009, 02:00 PM
When you say you have turned it right up what do you meen?

You have to screw it out for less boost & in for more boost.

Have you got it the right way round?

Some pics of you install if you can do it would help.
crazyken76
27-09-2009, 02:11 PM
i got the car off criss and it was already in me mate has had a look and said it was wrong put when he sorted it out it still doesnt go up and thats with winding it in
FUKUSHIMA VR4
27-09-2009, 02:32 PM
I've heard great things about MBC's. Apparently they help reduce boost spikes.
bigoxo
27-09-2009, 02:38 PM
air leak?
AlanDITD
27-09-2009, 02:48 PM
When you say you have turned it right up what do you meen?

You have to screw it out for less boost & in for more boost.

Have you got it the right way round?

Some pics of you install if you can do it would help.

Other way round on mine mate in for less out for more.