View Full Version : Hub Carriers
nuster100
28-09-2009, 04:19 PM
Tried searching for this, but to no avail.
Which models of mitsubishi galant share the same hub carrier knucles as the Facelift VR-4?
Not worried about the hubs as I can swap them over, but visiting a breakers that has a few galants in and wondering if any of the later ones share the same knuckles??
Jay
Confused
28-09-2009, 04:22 PM
Anything 99-on, I believe.
I'm really regretting not getting the ones off the silver W-plate we got loads of other bits from!
bradc
28-09-2009, 07:54 PM
It should be anything that has a chassis number in the format of Exxx-02xxxxxx
The 2 is the important bit as that is when the facelift model was introduced.
zedy1
28-09-2009, 11:06 PM
ive got a set for £220 including delivery
GalantOnly
28-09-2009, 11:08 PM
It should be anything that has a chassis number in the format of Exxx-02xxxxxx
The 2 is the important bit as that is when the facelift model was introduced.
/secret Learning something every day... Should be impossible
My FL is Exxx-03xxxxxx... What's going on with that?
Nutter_John
28-09-2009, 11:12 PM
thats a later model vr4 , they stop at 04xxxxx i think
GalantOnly
28-09-2009, 11:13 PM
Which models of mitsubishi galant share the same hub carrier knucles as the Facelift VR-4?Jay
Any kind of engine and transmission... Just facelift model - they got it /yes
GalantOnly
28-09-2009, 11:17 PM
thats a later model vr4 , they stop at 04xxxxx i think
So the first two digits doesn't mean anything, really? Just checked... One of my PFL is Exxx-51xxxxxx...:uhoh:
bradc
29-09-2009, 06:21 AM
PFL's are 00, 01 or 51.
FL's are 02, 03, 04, 05.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.