PDA

View Full Version : Hub Carriers



nuster100
28-09-2009, 04:19 PM
Tried searching for this, but to no avail.

Which models of mitsubishi galant share the same hub carrier knucles as the Facelift VR-4?

Not worried about the hubs as I can swap them over, but visiting a breakers that has a few galants in and wondering if any of the later ones share the same knuckles??

Jay

Confused
28-09-2009, 04:22 PM
Anything 99-on, I believe.

I'm really regretting not getting the ones off the silver W-plate we got loads of other bits from!

bradc
28-09-2009, 07:54 PM
It should be anything that has a chassis number in the format of Exxx-02xxxxxx

The 2 is the important bit as that is when the facelift model was introduced.

zedy1
28-09-2009, 11:06 PM
ive got a set for £220 including delivery

GalantOnly
28-09-2009, 11:08 PM
It should be anything that has a chassis number in the format of Exxx-02xxxxxx

The 2 is the important bit as that is when the facelift model was introduced.

/secret Learning something every day... Should be impossible

My FL is Exxx-03xxxxxx... What's going on with that?

Nutter_John
28-09-2009, 11:12 PM
thats a later model vr4 , they stop at 04xxxxx i think

GalantOnly
28-09-2009, 11:13 PM
Which models of mitsubishi galant share the same hub carrier knucles as the Facelift VR-4?Jay

Any kind of engine and transmission... Just facelift model - they got it /yes

GalantOnly
28-09-2009, 11:17 PM
thats a later model vr4 , they stop at 04xxxxx i think

So the first two digits doesn't mean anything, really? Just checked... One of my PFL is Exxx-51xxxxxx...:uhoh:

bradc
29-09-2009, 06:21 AM
PFL's are 00, 01 or 51.

FL's are 02, 03, 04, 05.