View Full Version : What gearbox fit?
NLduffyNL
16-01-2010, 05:49 PM
I'm looking around for the gearbox, i dont got the option to go 4wd
So im looking for a fwd manual gearbox.
I looked around a bit, but not sure if im right:
The gearbox of the 6a13 is the same as the 4g63? (Both F5M42 M/T)
Because i talked to the guy who sold me the engine, and he said i needed to get a V6 gearbox...
So does it fit?
Hope might someone know this, and help me to say if its possible or if its not.
Greetings Mark
peter thomson
16-01-2010, 06:41 PM
You will need the correct bell housing so it would be easier to source a V6
NLduffyNL
16-01-2010, 06:42 PM
Ah ok,
Is it something with the starter motor? that its on a other place?
So it isnt possible with the turbo's? (with the 4g63 gearbox)
I think ill just search for the v6 gearbox then (hard to get :/)
peter thomson
16-01-2010, 06:48 PM
Bradc has looked at the boxes from an evo and a few others . Also have a look for VR4 powered FTO's by Zentac and a couple of others
bradc
16-01-2010, 07:39 PM
What exactly is the full story, what car do you have, what is in it at the moment, etc etc
peter thomson
16-01-2010, 07:41 PM
Have a look here Brad
http://www.clubvr4.com/forum/showthread.php?t=45659
bradc
16-01-2010, 07:48 PM
Ohh right. I'd stick with a V6 FWD box then.
VR4WGN
16-01-2010, 08:31 PM
very nice looker matey.....Brad will be the best guy totalk to bout the gearbox,i dont see it being a problem,as for a FWD V6 Gearbox i have 1 if you want,just PM me and im more than happy to ship anywhere in the world if you need
NLduffyNL
17-01-2010, 01:41 PM
Ok thanks, ill just keep it on a V6 gearbox then.
And u got a pm from me :)
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.