I-S
16-01-2010, 10:04 PM
For sale is my BeOne Nirvana 1.0 frame.
http://www.askisaac.com/images/b1sale/1.jpg
This is a 17" frame (43cm). The frame is a true 4-bar design (aka horst link) with 100mm travel, which remains fully active under braking. I bought it new in January 2008 and it has barely been ridden (at most 10 rides) - I am going to stick with the SS for now.
http://www.askisaac.com/images/b1sale/2.jpg
It is currently fitted with a brand new (unridden) Rock Shox Bar rear shock - I had a Fox Float R which I used on this frame instead so this shock remained unused (it was intended as a backup for when the Fox went for service - in 10 rides it never needed to...). The mounting hardware is solid stainless steel on the top mount, similar to the heavy duty kits sold by TF tuned etc.
http://www.askisaac.com/images/b1sale/3.jpg
http://www.askisaac.com/images/b1sale/4.jpg
The chainstay has had a protector on it since new, so there are no chain strike marks on it, as seen in the pics.
http://www.askisaac.com/images/b1sale/5.jpg
Head tube. Note the black tape on the bottom left side - several pieces used around the frame to minimise cable rub.
Larger pics of both sides, front and back:
http://www.askisaac.com/images/b1sale/6.jpg
http://www.askisaac.com/images/b1sale/7.jpg
http://www.askisaac.com/images/b1sale/8.jpg
http://www.askisaac.com/images/b1sale/9.jpg
Also included is an Identi Seat Clamp:
http://www.askisaac.com/images/b1sale/10.jpg
I have also modified the frame to accept full-length gear outers:
http://www.askisaac.com/images/b1sale/11.jpg
BB 68mm
Seatpost 30.9mm
Headset: 1.125" semi-integrated
Asking £225
Also available are two 30.9mm seatposts that fit this frame:
Titec X-Wing Pro 7075
http://www.askisaac.com/images/titecpost.jpg
£15
Thomson Elite layback
http://www.askisaac.com/images/b1sale/thomson1.jpg
http://www.askisaac.com/images/b1sale/thomson2.jpg
£30
http://www.askisaac.com/images/b1sale/1.jpg
This is a 17" frame (43cm). The frame is a true 4-bar design (aka horst link) with 100mm travel, which remains fully active under braking. I bought it new in January 2008 and it has barely been ridden (at most 10 rides) - I am going to stick with the SS for now.
http://www.askisaac.com/images/b1sale/2.jpg
It is currently fitted with a brand new (unridden) Rock Shox Bar rear shock - I had a Fox Float R which I used on this frame instead so this shock remained unused (it was intended as a backup for when the Fox went for service - in 10 rides it never needed to...). The mounting hardware is solid stainless steel on the top mount, similar to the heavy duty kits sold by TF tuned etc.
http://www.askisaac.com/images/b1sale/3.jpg
http://www.askisaac.com/images/b1sale/4.jpg
The chainstay has had a protector on it since new, so there are no chain strike marks on it, as seen in the pics.
http://www.askisaac.com/images/b1sale/5.jpg
Head tube. Note the black tape on the bottom left side - several pieces used around the frame to minimise cable rub.
Larger pics of both sides, front and back:
http://www.askisaac.com/images/b1sale/6.jpg
http://www.askisaac.com/images/b1sale/7.jpg
http://www.askisaac.com/images/b1sale/8.jpg
http://www.askisaac.com/images/b1sale/9.jpg
Also included is an Identi Seat Clamp:
http://www.askisaac.com/images/b1sale/10.jpg
I have also modified the frame to accept full-length gear outers:
http://www.askisaac.com/images/b1sale/11.jpg
BB 68mm
Seatpost 30.9mm
Headset: 1.125" semi-integrated
Asking £225
Also available are two 30.9mm seatposts that fit this frame:
Titec X-Wing Pro 7075
http://www.askisaac.com/images/titecpost.jpg
£15
Thomson Elite layback
http://www.askisaac.com/images/b1sale/thomson1.jpg
http://www.askisaac.com/images/b1sale/thomson2.jpg
£30