NGK Iridium - Silly me

[Roberto]

Ok, so I was a bit silly when I ordered some new plugs and got the BKR6EIX-11 instead of the BKR6EIX.../dunce

And was to late to change the order when I realised my faux pas.

Cue the use of some feeler gauges, I've now gapped them to 0.8mm, well as close as I can, to a point where they are tighter than 0.85mm anyway.

I just wanted to be sure there was no issue in re-gapping them.

[Kieran]

Yeah, provided you've not caught the centre electrode and buggered it (which you'd know if you had) you'll be fine. :)

[Roberto]

Cheers K.

There was some rubbage of the feeler gauges, but no impacts to the centre electrode, just some to the ground electrode using a pliers.