View Full Version : Anyone got EC5A Brakes for sale?
wildfaye
16-06-2003, 02:52 PM
Hi, looking to upgrade my FTO to full 2000 EC5A front n rear brakes calipers, discs and all relevant parts. If you have a set for sale please contact me...cheers!
Roadrunner
17-06-2003, 10:46 AM
I have original front discs and calipers from my VR-4 and will have the rear discs and calipers available as soon as I source replacement discs. These have done approximately 50k miles but were still OK when I took them off. Changed because I replaced them with Brembo ones. No idea what they're worth, but not dear .... ;)
Email me if you're interested.
Brian
wildfaye
17-06-2003, 03:37 PM
Hey, thanks for e reply!
hmm...yours is a 98? does it differ from the later 99/00 models?
If your specs are as follows, I am interested!
Front: 294mm x 24mm INSERT INTO post VALUES (Ventilated); 5x114.3, Two pot Caliper
Rear: 284mm x 20mm INSERT INTO post VALUES (Ventilated); 5x114.3, Single pot Caliper
Most importantly, they must fit 16" wheels!
Cheers!
Sam
erm...:Ponder: where do I click to email you? still new here...
Roadrunner
17-06-2003, 03:45 PM
Hi Sam,
Yep, mine is the 99/00 model. Brake specs as you've detailed, standard as fitted under the original 16" wheels.
Hit the "profile" button on my post, then "click here to email ....", or send me a Private Message by the same sort of route.
Speak soon.
Cheers,
Brian
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.