code 13

[ianturbo]

does fault code 13 (air intake sensor) ?? = MAF ????
ian

[Davezj]

one way to check would be:-
unplug the MAF start the car leave it running for a bit. (if it will run, mine will but a bit lumpy)
then look at the error codes.

if it still only reports code 13 then probably yes.

[ianturbo]

would this cause this to happen even when not moving ??
you may have to forward to about 60 seconds :bigcry:
http://www.youtube.com/watch?v=kh5EDn7boxw
ian

[Davezj]

i take it you are not reading the error codes at this time. you have just unplugged the MAF.
reconnect the MAF and check the error code. see what it throughs up.

[ianturbo]

No MAF is still plugged in , done the dissconect battrey thing , runs ok but lights keep comin on , any ideas as I don't want to spend on a MAF if it's somethin else :)
ian

[psbarham]

if you've spliced in a new plug then i would look there 1st.