PDA

View Full Version : pete (pedro)


AlanDITD
23-03-2010, 10:34 PM
Dude i cant reply to pager as i aint a memeber no more, and you cant recive PM's and your not on MSN....bah!

Anyway, it needs a cat put in there so a flange needsto go on the end of the midsection, this means cutting a bit of it out as its 100% straight through, then bolt a cat between the mid section and the down pipes.

Or a dodgy MOT tester would be alot easier!

Cheers
pedro
23-03-2010, 10:38 PM
Cheers your a legend!!
AlanDITD
23-03-2010, 10:39 PM
No wories, bud..let us know how she gets on, whens it due again end of may?
pedro
23-03-2010, 10:41 PM
Oooh that would be nice... im panicing thinking its april....... hang on...
pedro
23-03-2010, 10:43 PM
Doh... 16th april
aboo
23-03-2010, 10:47 PM
Thanks guys you'v just reminded me I'll have to get the bolts drilled out my cat for MOT end of April.
AlanDITD
23-03-2010, 10:50 PM
Doh... 16th april

twat, you got a cat and someone that can do the work for ya? it shouldnt take long but the exhaust from the down pipes will have to come off...

will be much easier than th standard one to get off though as we made new mounting brackets for it and alot less of them iirc.
pedro
23-03-2010, 11:01 PM
twat, you got a cat and someone that can do the work for ya? it shouldnt take long but the exhaust from the down pipes will have to come off...

will be much easier than th standard one to get off though as we made new mounting brackets for it and alot less of them iirc.


No dont know anyone local yet........
Yes i have a cat
Yes i am a twat (though who fitted the system??? /lol)
AlanDITD
23-03-2010, 11:03 PM
LOL.....

Yes that would have been me, get saved up for a proper 3" backbox if you can and wack it on, the standard back box on a full 3" system is probs holding it back a touch and it will sound ace!!
pedro
23-03-2010, 11:07 PM
What diameter / bore is the exhaust? 3''?
pedro
23-03-2010, 11:08 PM
LOL.....

Yes that would have been me, get saved up for a proper 3" backbox if you can and wack it on, the standard back box on a full 3" system is probs holding it back a touch and it will sound ace!!

Any request/ reccomendation?
AlanDITD
23-03-2010, 11:11 PM
The exhaust is full 3" from the downpipes right the way back to where it curves round its then tappered down to 2 1/4 inch for the standard box to go on.

So a new small 3" section would need welding in to replace the 2 /4 inch area, abd then a new backbox bolting on to the existing flange...

bit of a pain but i was skint and couldnt afford a back box lol....

Should be worth it though.