PDA

View Full Version : How to refill the transfer box without any fancy oil pumps



GalantOnly
26-03-2010, 02:55 AM
I'm not a member atm, so I thought that it will be ok to place this thread here.../yes

Main gear: plastic bottle, 80 cm transparent plastic hose and some gravity

1. Cut the bottom of the bottle out and drill the hole in the cap, so the hose will stick in tightly
2. Place the bottle close to the fire wall and route the hose down to the transfer box
3. Stick the hose inside the x-box
4. Just pour the oil in the bottle

Max 5 min and the job is done/Banana

KHK
26-03-2010, 03:05 AM
i'd need 30 mins to complete the job,

amendment : i need 45 mins at least

Gly
26-03-2010, 06:00 AM
i use a old body was pump bottle, with a bit of hose on the end,
only takes a few mins to pump the transfer and diff full

and the botlle is a 1l one so i can see how much ive pumped in

GalantOnly
26-03-2010, 11:40 AM
i use a old body was pump bottle, with a bit of hose on the end,
only takes a few mins to pump the transfer and diff full

and the botlle is a 1l one so i can see how much ive pumped in

Yeah, I did that too.../yes But as I get older, it's gets harder to pump the bottle. It's easier just to pour :d